ni.kou sterling silver wire ring single ring female ring tail ring

●Material: 925 sterling silver ●Size: Thickness about 1mm ●Attention! Please be sure to confirm the size of the ring size before placing an order, because the products are all made after payment, and if the request for ring size change is made two days after the order is placed and paid, an additional modification fee will be charged. ●Ring girth measurement method & comparison table When making the ring, the size of the "international ring size in the store form" will be the main one. Please note the required "international ring size" when placing an order. Due to the differences in the size and size values of different countries, if you measure the circumference of the ring in Yinlou or other stores, it is recommended to measure and compare in the following ways to improve accuracy. ✽Measurement method 1. Go directly to the jewelry store and ask the clerk to help measure the "international size" size. Please note that it is not an American size, a Hong Kong size, or a Japanese size. 2. Place your ring on the ruler, measure the "inner diameter" of the ring (excluding ring thickness), and then compare the "inner diameter" with the table below. 3. Use a non-elastic paper strip or a tape measure to tighten around the "widest point" of the finger you want to wear, and compare the measured length to the ruler to get the "inner circumference". (Because each person’s measurement method is different, the error of this method is larger.) 4. Use NI.KOU or the measurement card, the link is as follows https://live.staticflickr.com/65535/48663943466_517093af9e_o.jpg Reminder: If your joints are wider than your fingers, please use the joint size as your guide. Try measuring your fingers in the evening, when they are at their largest. Generally speaking, the finger circumferences of the left and right hands are different. As fingers will expand with heat and contract with cold, avoid measuring after fingers are cold or exposed to hot water to avoid inaccurate measurements. https://live.staticflickr.com/65535/48654059558_8db5d784db_o.jpg ●**Before placing an order, please make sure that the size of the ring is correct. There is no return or exchange for customized products!** This product is "made to order" and production will begin after payment is made. It will take an average of 10 production days (excluding holidays and shipping time). ●Because the products are all handmade, there will be hand-made traces or asymmetry, etc., there is no way to be as perfect as a machine, the size and knock pattern will be slightly different from the photo, and the inner diameter of the ring will vary by +/-0.03cm If the error is acceptable, please place an order. https://live.staticflickr.com/65535/52467025406_29afefd15d_o.jpg ●Maintenance The Silver part does not provide repairs. If the jewelry part needs to be repaired, please provide pictures and discuss with the designer. The quotation depends on the damage condition, and you need to pay the round-trip freight separately. ●About our handmade jewelry We use 925 sterling silver and pure copper, and each jewelry is handmade. All are completed by traditional metalworking techniques - sawing, knocking, carving, welding, filing, setting, polishing and other processes. The handmade texture of welding and forging is retained. ●Tips on maintenance 1. All accessories, no matter what material they are made of, are afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemicals, etc., which will seriously damage the jewelry and cause oxidation, so try to avoid and stay away. 2. It is recommended to wear the jewelry frequently. The body's oils can make the jewelry produce a natural, moist and beautiful luster. 3. Jewelry will show signs of oxidation, vulcanization or oxidative yellowing and blackening over time. You can use a soft-bristled toothbrush dipped in toothpaste or tooth cleaning powder to lightly brush the surface, or wipe it with a Silver or Bronze cloth to restore it to its original state. Some metallic luster. 4. If the jewelry is specially vulcanized, please do not wipe it excessively to avoid the vulcanization design effect disappearing. 5. If you are worried that the chemical emulsion of Silver wiping cloth and Bronze wiping cloth will cause skin allergies, you can rinse it with clean water and dry it before wearing it. 6. Natural stones, crystals and pearls can be washed with clean water and then wiped with a soft cloth. 7. When not wearing it, clean it and store it in a sealed bag to reduce the oxidation rate. 8. Do not put various jewelry in the same jewelry box. Jewelry with different hardness will rub against each other and cause wear and tear. 9. Do not use any other tools to clean your jewelry, as it will leave scratches on the surface of the jewelry. If it is necessary to use a brush, please use a clean or very soft brush to scrub your jewelry. Origin/manufacturing method Origin: Handmade in Taiwan