The hammering chisel is as flashing as a starry star.
The fine lines create an elegant beauty.
◆ This product is produced after receipt of an order and it takes an average of seven working days to post (excluding holidays).
◆ The inside can be purchased by hand to type, the number of words can be limited to the following, linked as follows:
◆ Please inform the designer of the correct siege. If the ring is not correct, you need to modify the charge.
◆ Ring width is about 4.5mmc/thickness is about 1.5mm.
◆Mr.Beer's creation is handmade.
◆ Use an inelastic wire or cut a long piece of paper to wrap around your fingers and tighten it. Make a mark at the overlap of the paper. After the flattening, measure the circumference of the finger to inform the designer that this method will have an error. Rings are all used for the same shape of ring.
◆Recommended to the nearest jewelry store to ask the other party to use the tool to help the most accurate measurement.
◆When using the tool to measure, wear it comfortably and it won't drop. For example, on the 12th Taisong 11, the 11th and the half are too tight.
◆ Fingers will be affected by thermal expansion and contraction in summer and winter, referring to the summer season is about half of the number in winter, please consider.
999 sterling silver
◆ kraft paper texture box and paper bag.
◆ The silver cloth is placed on the bottom of the box (response to environmental protection without additional packaging!).
◆ Always wear your jewelry. The oil on the skin can provide a layer of protection for the jewelry, making it not easy to oxidize and darken.
◆If it is not worn for a long time, it can be put in a container with a good sealability, such as a clip chain bag.
◆ Avoid wearing with other metal ornaments at the same time, it is easy to produce scratches by friction and impact.
◆ Do not soak hot springs, seawater, and chemical agents to avoid chemical changes that may cause blackening of metals.
◆ Usually, you can use a little salad to gently scrub, then wash with clean water and dry it with a hair dryer.
[Silverware warranty and repair]
Mr.Beer's works are all provided with lifelong maintenance service. You only need to bear the return shipping cost, but you need to provide another quotation for the restoration of surface damage or metal fracture repair.
Origin / manufacturing methods