Classical style series-hollow curly grass ring 2019 new edition~

◎ Large area of hollow and smooth plant roll grass lines, suitable for girls who like plant lines and classic style, but do not like the ring too thick Material: 925 international standard silver Surface treatment: partial vulcanization and blackening + highly reflective mirror polishing ◎ Ring measurement: Method 1: Take out the old ring and measure the ring diameter. For example: 16.3mm (please try to be accurate, the error is 0.5mm or the difference is one number) Method 2: Measure "International Wai" at a silver building or jewelry store, and tell me what number it is Method 3: Wrap the wire around your fingers, take appropriate tightness, and unfold the length of the wire Method 4: Use a tape measure or a cloth ruler to wrap tightly around your fingertips, and then tell the length Method 5: Cut a long piece of paper, wrap it tightly around your fingertips, and then spread out the measured length to inform me. For example: 6.85 cm (this method is prone to measurement errors) Method 6: Measure the perimeter directly at the studio (this is of course the most accurate) [Silver maintenance] 1. Frequent wearing is the best way to maintain your body. The oils on your body can make the surface of silver jewelry have a natural luster, and it also makes it difficult for silver jewelry to turn black. 2. If you don't wear it for a long time, you can wipe it with a silver cloth and put it in the enclosed thick zipper bag. It will not react with the sulfide in the air. 3. Avoid soaking in hot springs and touching chemicals to avoid vulcanization and blackening. 4. Normally clean and maintain. Use a soft-bristled toothbrush to dip in the dishwashing detergent and wash gently. Wash with water and dry. 5. If the surface is vulcanized and turned black due to prolonged exposure to air, use a soft-bristled toothbrush to soak in toothpaste or wipe with a toothpaste on a napkin, and then wash it with water. 6. For severely blackened silver jewelry, first wash the grease with dishwashing liquid + hot water, then prepare a small pot, add water and salt (5 parts water + 1 part salt), boil until boiled, put in aluminum foil, and then Put the blackened silver ornaments into the boil for a few minutes, the surface silver sulfide will be reduced to pure silver, and it can be washed and wiped after turning white. ((Not applicable to silver that is intentionally blackened as a level, it may be completely washed white)) 7. Soak the silver water for 10 seconds, remove it and wash it, or use a soft cloth to wipe the silver milk. 8. If you want regular maintenance or polishing, you can ask the designer for assistance according to the business card information.