Material: TPU (BubblePro®) + Matte Translucent PC
Frame: Full wrap-around coverage
Weight: Approximately 33g on average (slight variations by model)
Lanyard Hole: Yes
Features:
Anti-Slip | Diagonal texture on sides enhances grip
Antimicrobial | Certified to resist 99.9% of bacteria
Fingerprint-Resistant | Matte, smudge-proof back shields against fingerprints
Full Protection | 1.5mm raised bezel for screen defense
Impact Resistant | Patented BubblePro® shock absorption with corner airbags
Ultra-Lightweight | Feather-light at 33g (slight variations by model)
Strong Magnetic Hold | Enhanced magnetic attraction (8N-9N), exceeding original manufacturer cases
Care Instructions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For minor stains, use clean water or a general wet wipe. Avoid organic solvents like alcohol or bleach.
⦿ Do not expose the phone case to extreme conditions such as high temperatures or humidity.
⦿ Oily hands, sweat, or smoking may also stain the case.
⦿ The case sides feature patented Bubble TPU for enhanced shock absorption and anti-slip properties. This material is not stain-resistant. If exposed to colored substances (e.g., lipstick, denim dye, bag interior pigments), it may be difficult to clean or impossible to fully remove stains. Consumers concerned about visible staining are advised to choose darker colors.
Product Notes:
⦿ Product colors may vary slightly due to differences in device screens and resolutions. Please refer to the actual product for accurate color.
⦿ The design and color scheme of this product are protected by copyright and have been approved by the original manufacturer. Image or case color changes are not available.
⦿ Comes with the original case color Bubble lens frame and buttons. Additional colors can be purchased separately.
⦿ This product can be converted into a lanyard-compatible phone case with the addition of a Screw Lanyard Ring Set or Lanyard Patch.
https://img.shoplineapp.com/media/image_clips/68c15b6c15ada400141429ff/original.jpg?1757502315=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.33,400 - อิเล็กทรอนิกส์ | No.14,637 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 104 ครั้ง
- มี 0 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้



