【ดิจิทัล】DIY Paper Low Poly Skull 3D Papercraft template PDF

DOWNLOAD PRINT ASSEMBLE Digital PDF template of a Skull for assembly from paper or cardboard. Make your own decorative skull box. Paper Scull can be used as a 1) decorative element, 2) box, and 3) stand due to the flat surface. The template is ready for printing. The instruction in the file is attached. To assemble the model, you need to print this file on thick A4/Letter paper or cardboard. IDEAS: 1) Make a skull vase – cut off the lid or do not glue the lid during assembly. 2) Color the skull with one color or color each polygon with a different color. PRINT: on colored paper DIFFICULTY: easy PARTS: 19 SHEETS(A4/Letter): 3 FINISHED model size: Height – 14 cm / 5,5". Width – 15 cm / 5,9". Depth – 18 cm / 3,1". There are two ways to reduce the size of the model when printing: 1) Decrease the percentage from 100% to what you need. 2) Choose to print two pages on one sheet – then you will get half the size of the figure. You can choose to print four, six, and so on pages on one page. To increase the model: 1) Print the template in A3 (140%), A2 (200%), A1 (280%), and A0 (400%) format. A4 format is the default size of 100%. DOWNLOADABLE content: 1) Manual with location of parts. 2) PDF template of the Skull (h14 cm). MATERIALS required for assembly: 1. Paper sheet of A4/Letter 160-260 g/m2. 2. Scissors or a craft knife. 3. Ruler. 4. Inkless pen or awl, or use the blunt side of a craft knife. 5. Glue stick, PVA, or similar product. Do you have questions or comments? Please write me a message. Attention! This is a digital product! Electronic PDF format. The model template is not intended for commercial use and is copyrighted. But you can use the assembled physical model for commercial purposes. Author of HOBBYMO Instagram: @hobbymo.papercraft