Identification card leather case with lanyard - brown vegetable tanned cowhide + environmentally friendly washed kraft paper

🔔Remind you, the inner layer of this leather case is made of "kraft paper" material, not full cowhide! If you want to find a full leather model, the design hall also provides a "full cowhide" identification card leather cover. Welcome to refer to: https://www.pinkoi.com/product/XUnsLzHZ/?openExternalBrowser=1 ◾️The identification card leather case can hold cards whose length X width is less than 9.7X6.4 cm👌 If it exceeds the size, you can also consult the designer for a customized leather case! ▪️Material and ingredients: vegetable tanned cowhide, "German washed kraft paper", bronze press buckle, 4x2mm cowhide lanyard. 🔹Natural cowhide is not infinitely long. If the leather rope meets the joint, it will be reinforced with a metal clip. Please use it with peace of mind🙏 *The weight of the leather case including the lanyard is about 30g. ▪️Customized content (please remember to fill in the custom requirements in the remarks column when placing an order👌): 1. The circumference of the lanyard can be customized within 100 cm. The identification card is often used for induction. The wearing position is usually set on the navel. The recommended circumference is 80 cm below 160 cm, and the recommended circumference is 90 cm above 175 cm. If not If specified, it is made with a standard circumference of 85 cm. 2. Printing English characters is limited to 12 characters, more than one word is 20 yuan, can be divided into upper and lower case, but the font and size cannot be changed; the printing position can be selected from the front edge (as shown in Figure 2) or the bottom to the middle of the back (as shown in Figure 9) Please contact the designer to confirm the position, if not specified, print in the standard position in Figure 9. 3. There are optional colors for hand-stitched Wax thread, please refer to the color card attached, if not specified, it will be produced in standard color (dark blue stitching). Note ⚠️ Therefore, it is a customized product, unless there is a major defect (for example: the size does not match the original order, you can ask for a redo), no return under other conditions will be accepted! Be sure to confirm the size, location and other requirements with the designer before ordering, so as to avoid regrets from happening😢 Note: 1. Vegetable tanned leather is a kind of environmentally friendly cowhide without any coating, modification, or chemical coloring treatment, so vegetable tanned leather must be made of high-quality raw cowhide! It has the characteristics of thick, strong and durable, but the most fascinating thing is that its surface will gradually change color with time and usage, which is the first choice for enjoying the fun of skin care👍 2. Textures, blood vessels, and scars on the surface of the leather are normal and natural phenomena. The best part of the leather will be selected for use during production, but there may still be some lines that cannot be avoided. Perfectionists, please consider purchasing. 3. Leather is not waterproof and anti-fouling, please use it carefully and avoid contact with hard objects. 4. For the products purchased at Slow Music Hands, we provide one-year warranty and life-long maintenance service on the premise of normal use, and the cost of work needs to be charged according to individual conditions; All logos will be printed, and if there is no special requirement, the printing position will be in the inconspicuous place on the inside. 5. For the purchase of products of customer/custom size, the museum only sells the leather case and does not sell the paper version, and reserves the right to use the paper version as a mass-produced public version in the future.