Space Shuttle_Glass Coating

• Space shuttle glass coating 100ml x 1 • PW surface treatment agent 250ml x 1 • Special cotton for coating x 3 Product features: • Designed for DIY and easy to construct • Can be used on all exterior glass of the car • Make the oil film less likely to adhere after use • Reduce the possibility of wiper hopping • Clearer and safer vision in rainy days Instructions for use: • Wash, use mild foam to clean away the "dirt" and "dust" on the glass, rinse with water after washing. • To remove, prepare a "car wash clay" to remove "particles" on the glass surface! Rinse with water after removal. Next, prepare the "Glass Oil Film Remover" to remove the oil film reliably, so as to improve the adhesion of the "coating" in the next step. After removing it, rinse with water. • Dry. The surface must be completely dry before construction. It is recommended to blow dry carefully with an air gun around the glass. "Drying" is very important! • To wipe, prepare a clean cloth and use PW deesterifier to remove "residues" that may not have been cleaned. This action is mainly for "final cleaning". • For plating, pour an appropriate amount of space shuttle onto our supplied white coated cotton. The key here is to spread the coating in a "straight line" first, and then use a circular motion to spread the coating evenly on the glass. The glass coating of the entire car is completed. After waiting for 30 minutes, use a new and clean cloth to wipe it off and you are done. • Try not to touch the water within a day after use, and wait a week before washing the car. • For the front windshield glass, it is recommended to reduce the use of "wipers" so that the glass coating will last longer! • The durability is up to six months, and the entire car glass can be used at least three times. Things to note: • It is not recommended to leave the agent in a high temperature environment in the car for a long time, nor is it recommended to place it upside down to avoid leakage. • During the coating process, press the opening with your hands throughout the process, because the coating cannot be exposed to air for a long time. Cover it after use and store it in a cool place. • Timeliness will vary based on actual usage. • This product is flammable, please store it in a cool place and away from fire sources. • Since the condition of each vehicle is different, if there is a jumping problem after construction, it is recommended to replace the Silicone water-repellent wiper to reduce the jumping problem.