Rising Steadily - Desk Lamp | Study Room Recommended | Full of Positive Energy | Natural Salt Therapy Series

.Product Specifications - Reference Size: 5”x5”x7”, Reference Weight: 4.5 kg ± 0.5Kg (1) This salt lamp uses a smart salt therapy starter (HE-26024). (2) Constant temperature control, power-saving and environmentally friendly, does not just heat. (3) Moving away from the traditional tungsten bulb heat source, an environmentally unfriendly structure, the new device has a lifespan 30 times longer. (4) Constant temperature control allows the salt body to continuously cycle between absorbing moisture and evaporating to produce negative ions, maintaining the optimal state for air purification. Overheating repels moisture absorption, while being too cold reduces negative ion excitation. (5) No need to keep the lamp on 24 hours to prevent deliquescence. When going out or sleeping, it can be kept warm without lighting, continuously producing negative ions and preventing deliquescence. https://live.staticflickr.com/65535/53717544623_ac484d912c_c.jpg (Spectrometer for far-infrared, showing internal temperature under constant temperature control) (6) Smart ambient lighting design.. Breathing salt, golden warm tones, silver-white cool tones, easy to match seasons and decor. https://live.staticflickr.com/65535/53733114701_31fcee29a4_k.jpg (7) World patent and international safety certification. https://live.staticflickr.com/65535/53717673674_7559e500d1_h.jpg https://live.staticflickr.com/65535/53717337396_1fd82d294a_k.jpg ____________________________________________________________________________ Operation Instructions Smart Salt Therapy Starter Installation: (1) The infrared remote control receiving wire must be placed outside the salt lamp to receive remote control signals. (2) When plugged in for the first time, it will display in cold and warm light mode after powering on. I. Install the smart salt therapy starter inside the salt body through the base. II. Install the smart salt therapy starter between the base and the salt body. III. Install the smart salt therapy starter in the container. https://live.staticflickr.com/65535/53717672264_132186b519_k.jpg ____________________________________________________________________________ Maintenance and Notes 1. Regularly dust the surface of the salt body with a dry cloth to maintain its good light transmittance. This also helps the Lung Benefit Clear salt lamp continuously operate effectively by converting moisture in the air. 2. If dust or grime, such as smoke stains, cannot be removed with a dry cloth, use a damp cotton cloth or sponge to remove dirt from the surface of the Lung Benefit Clear salt lamp. Avoid immersing the salt lamp in water as much as possible. 3. The Lung Benefit Clear salt lamp can be placed in rooms, bathrooms, damp basements, and other environments. However, ensure the smart salt therapy starter is operating normally to prevent the salt body from absorbing moisture and causing deliquescence. 4. To prevent condensation on the surface of the salt lamp due to humid weather or accidental splashing, it is recommended to keep the smart salt therapy starter turned on or in standby mode to avoid this phenomenon. 5. It is recommended to keep the smart salt therapy starter on during normal use for optimal performance. If the salt lamp will not be used for an extended period, wrap it in a plastic bag to protect it from moisture. 6. Avoid collisions or dropping to prevent breakage. <Notes> 1. Do not drop or apply heavy pressure to the remote control. 2. Do not mix [new and old] / [different brands] / [different types] of batteries, as this may affect the battery life and the function of the remote control, or cause damage. 3. If the remote control will not be used for a long time, please remove the batteries to prevent battery leakage from damaging the remote control. 4. This product uses standard AAA batteries (1.5V. AAA zinc-carbon batteries). Alkaline batteries are not recommended. <Service Description> 1. Damage caused by natural disasters or irresistible external forces. 2. Improper operation due to not following the instruction manual or usage guidelines. 3. Disassembly or repair by unauthorized technical personnel of our company.