It is a notebook type smartphone case.
May the frog of the blue frog and the thunder god of the cat protect you?
◎ The eyelet hole for attaching the strap is open.
◎ You can put a card inside.
● Select the model name or size.
● Android L size (terminal body size: 165mm height x 85mm width)
● Android M size (terminal size: 150mm x 80mm)
● Android S size (terminal body size: within 133mm in height x within 65mm in width)
------------------------------------------------------------
[IPhone]
This type fits the carrier into a special case.
Although there is a card pocket, magnetic cards such as IC cards are not recommended because of the possibility of malfunction due to the influence of smartphones.
There is a receiver hole that allows you to talk with the cover closed.
There is a stand function convenient for watching movies.
Notebook part: Polyurethane resin (PU) / white
Smartphone body fitting part: Polycarbonate resin (plastic) / white
Fastener part: magnet magnet
One eyelet hole on the upper back
------------------------------------------------------------
[Android]
The camera hole and the receiver hole are not open. Please see the image for the shooting method.
Android devices have different shapes depending on the carrier, so we adopt a method of sticking the main unit with a re-peelable sticker (a sticky sticker so that the terminal does not peel off). When attaching to a smartphone, remove dust and dirt attached to the main unit. If it is attached with dust, etc., the adhesive may weaken or the main unit may be damaged. Re-sticking is possible, but may cause the adhesive strength to weaken.
* Some models cannot be re-peeled. [The back of the smartphone is curved, rough, etc.]
* You cannot use a model with a fingerprint authentication or camera lens in the center of the back of the main unit.
* Please note that we cannot accept cancellations or returns due to the inability to attach.
Notebook part: Polyurethane resin (PU) / white
Smartphone body sticker
Fastener part: magnet magnet
One eyelet hole on the upper back
------------------------------------------------------------
* The inside is white.
* Because the printing of the belt part will shift, please understand that the pattern does not match basically.
* Please order the darker body after understanding that the white cracks in the bent part are noticeable.
* The image is for iPhone6.
Origin / production method
Origin: Japan Consignment production
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- เส้นใยสังเคราะห์
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ญี่ปุ่น
- ความนิยม
-
- ถูกชม 803 ครั้ง
- จำหน่ายไปแล้ว 1 ชิ้น
- มี 7 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- Staying together makes everyday fun.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้