b&h Deluxe 5-in-1 Digital Double Bottle Warmer

https://www.youtube.com/watch?v=8GbxSPCQ5Fs Product Specification Rated voltage: AC220V/50Hz Power Consumption: 270W Implementation of standard: IEC60335, IEC62233, IEC55014, IEC61000, EMCMain Material: PP (except panel, Teflon heating plate and plug) Weight: 880gram Features - Unique function in Hong Kong: double bottles of milk can be warmed. Warm milk and mother's supplements (such as chicken essence) at the same time, saving twice the time. - 5-in-1 function: dual bottles of milk or food warning, defrosting, heating up,Steril, Preset -Warming Milk: There will be no loss of nutrients in formula milk powder/breast milk/food due to a sudden rise in temperature. The target temperature can be freely adjusted within the range of 37-55 ℃ - Defrosting: The target temperature can be freely adjusted within the range of 37-44℃ - Warming Food: can heat different utensils or complementary foods packaged in aluminum thin seals, and can freely adjust the target temperature within the range of 56-85 ° C - Sterilizing: 100 ℃ steam sterilization, sterilize baby bottles, pacifiers, teethers and other small accessories. The target disinfection time can be freely adjusted: 10, 15, 20, 25, 30 minutes - Preset of function: Ccan be booked in advance from 1 hours to 12 hours - Automatic anti-dry heating: If the amount of water is insufficient or total evaporation occurs, heating will automatically stop, safe and reliable How to clean: Before first use or after each use, unplug this product and let it fully cool down. Then wipe the exterior of the product with a damp cloth. Recommended to use b&h Natural Cleanser to clean the tray, top lid and the heating tank and wipe them dry with cloth. Do not immerse the main body in water for cleaning. Do not use corrosive detergent, abrasive powder, wire mesh brush or abrasive cleaning tool to clean the main body and Teflon heating plate. Recommended to descale the Teflon heating plate every week to keep its maximum efficiency and avoid mineral deposits. Descaling Methods as below : White Vinegar – Pour 30ml/1oz. of white vinegar mixed with 60ml /2oz. cold water into the heating tank and leave it to act for 20 minutes (or longer if not descaling every week). Never switch on the product during the descaling cycle. After descaling, rinse the heating tank thoroughly, clean and dry all the internal and external areas carefully Citric Acid – Mix one sachet of citric acid (10g) with 150ml / 5oz. of water. Pour the solution into the heating and leave it to act for 20 minutes (or longer if not descaling every week). Never switch on the product during the descaling cycle. After descaling, rinse the heating tank thoroughly, clean and dry all the internal and external areas carefully Before using citric acid, it is recommended to read the instructionscarefully, keep out of eyes and keep out of reach of children. Note: To reduce limescale, use pre-boiled or filtered water.