Material: TPU (BubblePro®) + PC
Edge Protection: Full wrap-around sides
Weight: Approximately 33g on average (slight variations depending on model size)
Lanyard Hole: Yes
Features:
Anti-slip | Diagonal texture on the sides enhances grip
Anti-bacterial | Certified to resist 99.9% of bacteria
Anti-fingerprint | Matte, smudge-resistant back panel repels fingerprints
Full Protection | 1.5mm raised edge for screen protection
Impact Resistance | Patented BubblePro® shock-absorbing corners
Ultra-lightweight | Feather-light at 33g (slight variations depending on model size)
Strong Magnetic Adsorption | Enhanced magnetic force (8N-9N), exceeding original manufacturer cases
Care Instructions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, we recommend cleaning with water or a standard wet wipe. Please avoid using organic solvents such as alcohol or bleach.
⦿ Avoid exposing the phone case to extreme environmental conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., may also cause the phone case to become soiled.
⦿ The sides of the phone case feature patented Bubble TPU, significantly enhancing shock absorption and anti-slip properties. This material is not stain-resistant. If exposed to pigments or stains (e.g., lipstick, denim dye, bag interiors), cleaning may be difficult or impossible. Consumers concerned about visible staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to differences in device screens and resolutions. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product have been approved by the original manufacturer and are protected by design copyright. We do not offer services for changing graphics or case colors.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Additional colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding the optional screw hanging ring set or hanging piece.
https://img.shoplineapp.com/media/image_clips/68c15b6ca7cc7300142042fc/original.jpg?1757502315=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.16,484 - อิเล็กทรอนิกส์ | No.6,211 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 20,247 ครั้ง
- มี 0 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can be shipped worldwide.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้






