Product Material: TPU (BubblePro®) + PC
Case Coverage: Full edge protection
Product Weight: Approximately 33g on average, with slight variations depending on the model size.
Lanyard Hole: Yes
Product Features:
Anti-Slip | Diagonal texture on the sides enhances grip.
Ultra-Antimicrobial | Certified antimicrobial, effectively combating 99.9% of bacteria.
Anti-Fingerprint | Matte, smudge-resistant back panel repels fingerprints.
Full Protection | 1.5mm raised bezel for superior screen defense.
Impact Resistant | Patented BubblePro® shock-absorbing technology with corner airbags.
Ultra-Lightweight | Feather-light at 33g (slight variations depending on model size).
Strong Magnetic Force | Enhanced MagSafe magnetic attraction, 8N-9N strength, surpassing original manufacturer cases.
Precautions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, it is recommended to use clean water or a regular wet wipe. Avoid organic solvents such as alcohol or bleach.
⦿ Refrain from exposing the phone case to extreme environmental conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., may also cause the phone case to become soiled.
⦿ The sides of the phone case utilize patented Bubble TPU, significantly enhancing shock absorption and anti-slip properties. This material is not stain-resistant. If exposed to pigments or stains (e.g., lipstick, denim dye, dirt from inside a bag), cleaning may be difficult or impossible. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to differences in device screens and resolutions. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product have been approved by the original manufacturer and are protected by design copyright. We do not offer services for changing patterns or case colors.
⦿ The original case color Bubble lens frame and buttons are included with your purchase. Additional colors can be purchased separately.
⦿ This product can be transformed into a strap-compatible phone case by adding a screw hanging ring set or a hanging piece.
https://img.shoplineapp.com/media/image_clips/68c15b6ca7cc7300142042fc/original.jpg?1757502315=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- ซิลิคอน
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.228 - อิเล็กทรอนิกส์ | No.30 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 31,248 ครั้ง
- จำหน่ายไปแล้ว 10 ชิ้น
- มี 258 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product is available for shipping worldwide.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้






