[**Horizontal and Vertical Identification Card Cover**] **Material:**Italian Vegetable Tanned Calfskin, Pig Leather (Back Pocket) **Size:**11.5cmX8cm **Product Description:** 1. The transparent sheet is made of hard PVC sheet, which will not turn yellow after long-term use, will not stick to the ink or film on the ID card, and will not soften and become uneven when exposed to the sun. https://live.staticflickr.com/65535/49780211983_c6d92ec1ba_b.jpg 2. The back pocket is made of light, thin pig leather with excellent elasticity and toughness, which is not easy to loose after long-term use and has good covering power. https://live.staticflickr.com/65535/49781081207_1bc9e5e08e_b.jpg 3. When placing the card, please put the back side up, the card will be seated from the oblique corner, and then turn forward and push in. https://live.staticflickr.com/65535/48038800137_fd8fedcc51_o.jpg https://live.staticflickr.com/65535/48038739463_d3f7ea78ed_o.jpg 4. The exclusive design of the L-shaped opening can prevent the card from slipping out when it is turned upside down. https://live.staticflickr.com/65535/48038803267_d85d2d3b30_o.jpg 5. When changing the direction, the opened leather buckle will be stuck first to avoid falling directly. https://live.staticflickr.com/65535/48038803277_9e378d2647_o.jpg 6. Video demonstration of changing the wearing direction: https://youtu.be/Qls28963Aqo **[neck rope]** **Material:**Italian chrome-tanned calf leather **Size:**The total length is about 110cm (after unfolding), and the width is about 0.8cm **Product Description:** 1. It can be regarded as a mini belt, and it can be used like a belt. https://live.staticflickr.com/65535/49553616342_94ea963ba4_b.jpg 2. Both the front and back are made of soft leather, which is comfortable to wear and does not prick the skin. 3. The length of the rope can be freely adjusted according to the needs. https://live.staticflickr.com/65535/49552882298_7b92cebe10_b.jpg 4. The neck rope can be rotated freely, so that the leather rope has the opportunity to ventilate at any time, so as to avoid the same position absorbing the grease and sweat of the neck for a long time and becoming black and dirty. https://media.giphy.com/media/STTUE2QzoBBHcu8eFt/giphy.gif **Maintenance method:** 1. It is recommended to wipe, maintain and clean the leather neck rope regularly to prolong the life of the leather, especially in summer when you are prone to sweat or come into contact with sunscreen, you can use a pure water wet paper towel to wipe the entire leather rope, and after it is completely dry, wipe it with a cotton cloth Apply leather maintenance oil evenly. 2. If the leather is soaked by a large amount of water, it should be restored to dryness as soon as possible, and then re-oiled for protection. If it is allowed to dry naturally, the leather tissue is easy to shrink, deform and harden. 3. Avoid prolonged exposure to sunlight. 4. In addition to the temperature and oil of the hands, the leather will gradually show a natural and moist color and luster. It is also recommended to wipe it with a dry cloth regularly and then maintain it with leather oil. 5. Mildew spots on the leather are gradually formed when dust and moisture in the air meet, so if there are leather items that have not been used for a long time, first wipe off the dust with a dry cloth, and then use a dustproof cloth cover, kraft paper or cotton cloth (optional) Cut from an old white cotton T-shirt) wrapped and stored in a ventilated place; or frequently touching leather goods (avoiding dust and moisture coverage) can also reduce the chance of mold, just like the principle that rolling stones do not grow moss. 6. Avoid using maintenance cleaners containing alcohol. [**Steel wire telescopic pull ring**] **Material:**Italian vegetable tanned cow leather, Taiwan-made steel wire pull ring **Size:**The diameter is about 3.3cm, the thickness is about 1cm, and the line length is about 46cm **Product Description:** The wire of this telescopic pull ring is twisted into a strand of six thin steel wires, and then covered with a film. It is easy to cut with wire pliers, but when the film is worn, the steel wire is in a state of lack of protection. If used all the time, it will become fragile. So if you can refer to the following precautions and video instructions, and do a good job of daily inspection and processing, he will live longer. **Precautions for use and maintenance:** 1. When the steel wire is pulled out, avoid being scratched by other objects. 2. Avoid excessive bending or concave bending of the steel wire. 3. The hanging items are mainly general identification card sets, and if the load is too heavy, the internal shrapnel and line segments will easily move, reducing the resilience. 4. Please pay attention to the elastic force generated when stretching the line segment, so as to avoid hurting yourself and others. 5. You can regularly wipe leather oil, Wax or vaseline on the wire segment to reduce friction loss when the wire segment rotates and prolong the service life. 6. Avoid heavy objects or external force from squeezing the round body of the telescopic pull ring, which may cause the line segment to get stuck. (The telescopic pull ring is covered by two upper and lower shells. If it is accidentally squeezed by an external force, it is likely to cause the wire reel inside to get stuck, and the wire segment cannot be retracted automatically after being pulled out.) 7. How to prevent the wire from breaking? How to fix the wire when it gets stuck? Please refer to the video below: (⚠️When operating, you must first fix the telescopic pull ring and the steel wire segment to ensure that it will not spring and shrink arbitrarily, so as to avoid being injured by bullets.) https://youtu.be/wBVNoZ3s6xQ **Steel wire telescopic pull ring fixing instructions:** Within half a year from the date of delivery of the product, enjoy free maintenance, and you can send (pick up) the item in person or send it back to the designer with a return mail. The cost of repairs outside the warranty period depends on the damage. Product damage due to human factors, such as improper use, impact or breaking, is not covered by the "BeingLife" warranty. **Lettering service:** 1. You can choose one position for free engraving on the identification card cover. If you need more than a second engraving position, you are welcome to purchase it here: https://www.pinkoi.com/product/WQj8dmgb 2. This retractable pull ring has two sides, one side is the brand LOGO, and the other side is blank. If you need lettering, you are welcome to buy it here: https://www.pinkoi.com/product/b8YCvXNB https://live.staticflickr.com/65535/50913836452_fd751b7309_b.jpg 3. After deciding on the engraving content and engraving position, please note in the "Message to Designer" in the order. **[Intimate Reminder]:**If there is a stamped engraving service, it is an exclusive custom order and needs to be paid in advance; in addition, because customized products cannot be resold, we cannot apply for returns and refunds, thank you for your support with understanding. **The fonts and typefaces provided are as follows:** https://live.staticflickr.com/65535/49925619286_f1b2d165aa_b.jpg **[Selection of lettering position on identification card sleeve]:** **1. Front beveled edge**(Straight and horizontal wear are compatible with the position, can accommodate up to 8 characters, including spaces; emoticons occupy about two characters) https://live.staticflickr.com/65535/51968199283_9fe42930f8_b.jpg **2. The beveled edge on the back**(straight and horizontal wear are compatible with the position, can accommodate up to 8 characters, including spaces; emoticons occupy about 1.5~2 characters) https://live.staticflickr.com/65535/51968205928_89d7a5b551_b.jpg **3. Face straight to the upper right corner**(suitable to accommodate within 8 characters, including spaces; emoticons occupy about 1.5~2 characters) https://live.staticflickr.com/65535/51967138572_7ae96212f4_b.jpg **4. The back is straight to the upper left corner**(suitable to accommodate within 8 characters, including spaces; emoticons occupy about 1.5~2 characters) https://live.staticflickr.com/65535/51968429554_ccba001201_b.jpg **5. The upper left corner of the front side**(up to 15 characters, including spaces; emoticons occupy about 1.5~2 characters) https://live.staticflickr.com/65535/51968208963_82b19649d6_b.jpg **6. Horizontal upper right corner of the back**(up to 15 characters, including spaces; emoticons occupy about 1.5~2 characters) https://live.staticflickr.com/65535/51968210203_4a09a4b7a7_b.jpg **The retractable pull ring can accommodate up to 8 characters. The photos of the lettering are as follows:** https://live.staticflickr.com/65535/52292601442_e52b93bbeb_b.jpg https://live.staticflickr.com/65535/52293849699_cd667213b7_b.jpg https://live.staticflickr.com/65535/52293587518_2eaa1b84a8_b.jpg **Packing:** General shipping packaging (kraft paper bag): https://live.staticflickr.com/65535/52408608443_bda077d568_b.jpg If you need gift box packaging (kraft paper box + natural cow leather strap), welcome to add it here: https://www.pinkoi.com/product/sLCj7D23 https://live.staticflickr.com/65535/50544723417_2732661e52_b.jpg https://live.staticflickr.com/65535/50544723302_c80772e546_b.jpg **About natural leather:** We try to avoid the obvious scars left by mosquito bites during the growth process of cattle; in addition, each piece of leather will have growth lines. These imprints of the life course are the unique parts of each product. share. **BeingLife Design/Hand Sewn** **Designed and handmade in Taiwan**
- มากกว่า 10 ชิ้น
- ถูกชม 7,632 ครั้ง
- จำหน่ายไปแล้ว 75 ชิ้น
- มี 176 คนถูกใจ
- Can be worn in portrait or landscape orientation. Specially designed right-angle opening on the back for placing cards, so you don't have to worry about the cards falling out when placed horizontally or upside down. There is an extra layer of pockets on the back that can store business cards and cards. It can be hung on the backpack alone or used with the neck rope to assist in extending the stretch identification card cover.