Material: TPU (BubblePro®) + Frosted Semi-Transparent PC
Edge Protection: Full wrap-around edges
Weight: Approximately 33g on average, with slight variations depending on the model size.
Lanyard Hole: Yes
Product Features:
Anti-Slip | Diagonal texture on the sides enhances grip.
Ultra-Antimicrobial | Certified antimicrobial, effectively combating 99.9% of bacteria.
Fingerprint Resistant | Frosted, smudge-proof back panel repels fingerprints.
Full Protection | 1.5mm raised bezel for superior screen defense.
Impact Resistant | Patented BubblePro® shock-absorbing technology with reinforced corners.
Feather-light | A mere 33g (weight may vary slightly by model).
Strong Magnetic Adhesion | Enhanced magnetic force (8N-9N), surpassing original manufacturer cases.
Care Instructions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple dirt, we recommend cleaning with water or a regular wet wipe. Avoid organic solvents such as alcohol or bleach.
⦿ Refrain from exposing the phone case to extreme environmental conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, and smoking can also lead to staining of the phone case.
⦿ The sides of the phone case feature patented Bubble TPU, which significantly enhances shock absorption and anti-slip properties. This material is not stain-proof. If it comes into contact with pigments or stains (e.g., lipstick, denim dye, dirt from inside a bag), it may be difficult or impossible to clean completely. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to differences in screen display and resolution. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product are approved by the original manufacturer and are protected by design copyright. We do not offer services for image or case color exchanges.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Additional colors can be purchased separately.
⦿ This product can be transformed into a strap-attachable phone case by adding a screw-in strap ring set or a strap piece.
https://img.shoplineapp.com/media/image_clips/68c1613a0f6df3000ed0fc06/original.jpg?1757503801=&owner_id=5f154b2d57a610002ff1679d
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.22,472 - อิเล็กทรอนิกส์ | No.8,105 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 704 ครั้ง
- จำหน่ายไปแล้ว 1 ชิ้น
- มี 4 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้





