Material: TPU (BubblePro®) + PC
Edge Protection: Full surrounding coverage
Weight: Approximately 41g on average, with slight variations depending on model size.
Lanyard Hole: Yes (Ultra series models do not have a lanyard hole due to the pen slot)
Features:
Slip-Resistant | Diagonal texture on the sides enhances grip.
Highly Antibacterial | Certified antibacterial, effective against 99.9% of bacteria.
Anti-Fingerprint | Matte, smudge-resistant back panel resists fingerprints.
Full Protection | 1.5mm raised bezel for screen protection.
Impact Resistant | Patented BubblePro® shock-absorbing air corners.
Ultra-Lightweight | Feather-light at 41g (slight variations depending on model size).
Strong Magnetic Attraction | Enhanced magnetic force, 8N-9N, exceeding original manufacturer cases.
Care Instructions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple dirt, we recommend cleaning with clean water or general wet wipes. Avoid using organic solvents such as alcohol or bleach.
⦿ Avoid exposing the phone case to extreme external conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., can also stain the phone case.
⦿ The sides of the phone case use patented Bubble TPU, significantly enhancing shock absorption and anti-slip effects. This material is not stain-resistant. If it comes into contact with pigments or stains (e.g., lipstick, denim dye, dirt from inside a bag), it may be difficult to clean or impossible to remove completely. Consumers concerned about obvious staining are advised to choose darker models.
Product Notes:
⦿ Colors may vary slightly due to differences in device screens and resolutions; please refer to the actual product for color accuracy.
⦿ The design and color scheme of this product are approved by the original manufacturer and are protected by design copyright. We do not offer image or base case color exchange services.
⦿ The case comes with a lens frame and buttons in the original case color. Other colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding an optional screw ring set or hanging piece.
https://img.shoplineapp.com/media/image_clips/698934d26319f149fb6e940c/original.jpg?1770599633=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.8,367 - อิเล็กทรอนิกส์ | No.3,715 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 203 ครั้ง
- มี 0 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product ships worldwide.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้

