■ It is a wooden business card holder made with laser cutting and hand finishing.
As Zippo lighter has become a mechanism to open from the side clicking.
(It is structured to lock firmly so you can not come off from yourself)
Animal series This time a rare animal, Okapi / Okapi
I carve one step on the base card holder of the base and embed different wood there.
Also, there is little deviation of grain from the lid with 0.2 mm cut width of laser cut.
So the beauty of the grain is uncomfortable and the joints are also natural! !
I use a walnut board.
Embedding materials are red trees, scintang, Hawaiian mango, wenge and so on.
Size is approximately 68 mm × 105 mm × thickness 12 to 13 mm
Finishing, even if you lick it,
Osmocolor natural oil finish. (There is a simple water repellent effect)
I will enter around 20 cards with normal business cards.
[Kodawari point 1]
Bonding of the front and back boards inside to improve accuracy and strength
We are stocking 18 bamboo shafts inside (not visible from the outside)
[Kodawari point 2]
We devised internal structure so that business cards will not get dirty,
We devise it so that business cards touch only a minimum.
【Kodawari Point 3】
"Locking part" click! "It depends on feeling and ease of opening.
[Kodawari point 4]
The inscription of the timber name on the inside! !
Simple wrapping free! !
※ Since the photograph is for photography, the items to be delivered will differ slightly in grain and color.
Please acknowledge it beforehand.
※ Parquet combination is also different from the picture.
If there is stock, it can be shipped immediately, but if there is no stock it is made to order
It takes 3 ~ 5 days by shipping.
Production area / production method
Saga Japan / hand made