Material: TPU (BubblePro) + PC
Edge Protection: Full wrap-around edges
Weight: Approximately 33g on average, with slight variations depending on model size
Lanyard Hole: Yes
Features:
Anti-Slip | Diagonal texture on the sides enhances grip
Ultra-Antimicrobial | Certified to resist 99.9% of bacteria
Anti-Fingerprint | Matte, smudge-resistant back panel repels fingerprints
Full Protection | 1.5mm raised edge for screen defense
Impact Resistant | Patented BubblePro® shock absorption with corner airbags
Feather-light | 33g ultra-lightweight (slight variation by model size)
Strong Magnetic Hold | Enhanced MagSafe strength (8N-9N), exceeding original manufacturer's case
Care Instructions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, use clean water or a standard wet wipe. Avoid organic solvents like alcohol or bleach.
⦿ Do not expose the case to extreme conditions such as high temperatures or humidity.
⦿ Oily hands, sweat, or smoking may also stain the case.
⦿ The case sides feature patented Bubble TPU for enhanced shock absorption and anti-slip properties. This material is not stain-proof. If exposed to colored substances (e.g., lipstick, denim dye, bag interiors), stains may be difficult or impossible to remove completely. For consumers concerned about visible staining, darker color options are recommended.
Product Notes:
⦿ Colors may vary slightly due to differences in screen settings and resolution. Please refer to the actual product for color accuracy.
⦿ The design and color combinations are approved by the original manufacturer and are protected by copyright. Customization of patterns or case colors is not available.
⦿ The original case color Bubble lens frame and buttons are included. Additional colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding the optional screw strap ring set or strap piece.
https://img.shoplineapp.com/media/image_clips/68c15b6ca7cc7300142042fc/original.jpg?1757502315=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.10,216 - อิเล็กทรอนิกส์ | No.3,281 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 393 ครั้ง
- มี 0 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้




