110cm is the second height level for the Little Egret.
It is tall enough to hang shirts and jackets, while pants can be hung folded. The A-frame top ends are perfect for hats or bags without needing hooks. This specific height is the most frequently chosen for outdoor settings because of its ideal size and weight. A clothing brand once ordered ten of these 110cm racks at once for their pop-up retail space.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/%E8%A9%A6%E6%8B%8D2-1930-%E7%B7%A8%E8%BC%AF-1024x937.jpg
The sample in the photo is the 110cm version.
■ Two wooden pieces clamp a round bar, ensuring no swaying left or right.
The original design approach was intuitive: pair the legs, join them with mortise-and-tenon joints, and connect the sides with a crossbar.
However, the results were not ideal. A-frame legs joined with mortise-and-tenon joints **could not stably maintain their spread angle**, and required wooden dowels for connection. Furthermore, using a crossbar to connect the legs directly meant that **no matter how tightly it was fastened, it would eventually loosen after use.**
The designer then conceived of a clamp-style fixation, which completely resolved these issues.
The center crossbar is milled into a round rod, and a semi-circular groove is milled into each leg where they connect. Two legs clamp the crossbar in these grooves, and a locking bolt passes through all three components to hold them firmly together. This structure allows the rack to resist swaying in **both front-to-back and left-to-right directions** once assembled.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/09/egret-old-design-joint-768x1024.jpg
The older design. A square crossbar was bolted directly to the A-frame legs; without the interlocking grooves, it would loosen over time regardless of how tight it was.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/DSC_5804-1024x684.jpg
The ends of the crossbar are round, and two leg panels clamp it from the front and back. The screw provides the tension, while the semi-circular grooves effectively prevent swaying.
■ No hardware embedded in the wood
Because the two-piece locking bolt fastens directly, there is no need to embed any hardware into the wood. This means we don't rely on the wood's tension to hold the hardware, so even significant tightening force will not damage the wooden components.
This difference might not be obvious at the time of purchase, but you will feel it after extended use: even if the threads on the locking bolt wear out, you can simply replace the screws; the legs and the round crossbar remain completely unaffected. If hardware were embedded directly into the wood, you would have to replace the entire leg if it broke.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/DSC_5780-1024x684.jpg
The black component is the head of the locking bolt. The entire set can be disassembled and replaced.
■ Specifications
Height | 110 cm
Width | 85/120/160 cm (choose one)
Base Depth | 45 cm
Frame Legs | Domestically produced, solid wood (ash)
Crossbar | Solid wood (beech), 3 cm diameter
Finish | Water-based wood lacquer; no solvent-based (oil-based) paints used
Hardware | Carbon steel locking bolts. Installation requires two hex wrenches, included with the order
Feet | Black foam tape, providing grip even without silicone caps
Shipping | Custom paper tube. Disassembled into four legs + one crossbar for your own assembly
Second Crossbar | Not an option (available only on 150/175 cm models)
■ Three checkpoints to control formaldehyde from the source
Formaldehyde emission standards for engineered wood are divided into three tiers in Taiwan, with F3 being the mandatory threshold and F1 being the highest.
Grade | Formaldehyde Emission (average) | What this grade represents
F1 | ≤ 0.3 mg/L | Highest grade, equivalent to Japanese F☆☆☆☆. The best rating for engineered furniture.
F2 | ≤ 0.5 mg/L | Common in Taiwan and Japan, the tolerance is 1.7 times that of F1.
F3 | ≤ 1.5 mg/L | Mandatory minimum threshold in Taiwan; products below this cannot be sold. Tolerance is 5 times that of F1.
However, the solid wood materials used by Jiuwo are not on this chart. We have strict standards for our materials, glue, and lacquer.
**1st Checkpoint | Material** This grading chart applies to engineered wood made of chips and scraps pressed with glue, which requires formaldehyde management. Jiuwo uses natural solid wood, which contains no added formaldehyde and thus has no need for these grades.
**2nd Checkpoint | Glue** Natural wood planks are typically only 10-20 cm wide. Making large boards or connecting wood pieces requires glue. We use water-based wood glue for board joining and do not use formaldehyde-based resins.
**3rd Checkpoint | Lacquer** Our water-based wood lacquer was tested by SGS Chemical Laboratory (Kaohsiung) and found to have formaldehyde levels below the detection limit of 0.1 mg/L (the F1 threshold is 0.3). Report KC/2017/60064A-01, June 14, 2017. The sample tested was EPnS environmentally friendly water-based lacquer, not the final finished product.
We do not claim our lacquer is food-grade, as we don't expect you to drink it.
https://9housedesign.com/zh/wp-content/uploads/sites/2/2026/07/spec_LG-ALL-110CM-120CM-NO-QUICK-1024x1024.png
Please refer to the figures in this diagram.
■ Add-ons
**Quick-release Kit**: Add directly via the options above. Twist by hand without needing a hex wrench—only necessary if you assemble and disassemble daily. For home use of two or three times a year, the standard screws are sufficient.
**Clothes Hooks**
https://www.pinkoi.com/product/pRtSnneS
: Purchase on a separate page. Available in three lengths; this height pairs with the **42 cm (children and adult)** version. Sold in sets (3 to 24 pieces). Includes silicone end caps to prevent clothes from sliding off the ends and to reduce hanging marks.
**Special Crossbar**
https://www.pinkoi.com/product/GXEAJA5w
: If you wish to change the width after your purchase, simply replace the crossbar while keeping the original frame legs.
■ Installation Demonstration
Watch this video for assembly instructions.
https://www.youtube.com/watch?v=tEpVL5SVfSQ
■ Ordering
Select your preferred width and add it to your shopping cart.
If the height or width you require is not listed, please use the "Contact Designer" feature on the site before placing your order. You will receive a direct reply from the designer.
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- ไม้
- วิธีการผลิตสินค้า
- แฮนด์เมด
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- บริการสั่งทำพิเศษเฉพาะลูกค้า, ได้รับรางวัล
- จำนวนในสต๊อก
- เหลือเพียง 4 ชิ้น
- อันดับสินค้า
- No.3,072 - กีฬางานอดิเรก | No.387 - Camping Gear
- ความนิยม
-
- ถูกชม 4,530 ครั้ง
- จำหน่ายไปแล้ว 1 ชิ้น
- มี 32 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- The 110cm Little Egret garment rack is perfectly balanced in size and weight, making it the most popular height of the four available for outdoor use: whether for markets, exhibitions, or camping, it's ideal for hanging clothes and towels. The design features two frame legs that clamp onto a round bar, locking securely in place. It disassembles into a few wooden slats that store neatly inside a paper tube. Available in three widths.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้















