Wooden business card holder [Autumn] Walnut

■ It is a wooden business card holder made with laser cutting and hand finishing. As Zippo lighter it has become a mechanism to open from the side clicking. (It is structured to lock firmly so you can not come off from yourself) The extreme of laser processing! I carve one step in the base card holder of the base and embed different wood there. "Autumn" I designed autumn leaves, fallen leaves, autumn feeling. Also, there is almost no gap between the grain and the lid with a cut width of 0.2 mm of the laser cut. For that reason the beauty of the grain is uncomfortable and the joints are also natural! ! I use a walnut board. Embedding materials are mahogany, Hawaiian core, mulberry. Size is approximately 68 mm × 105 mm × thickness 12 to 13 mm Finishing, even if you lick it, Osmocolor natural oil finish. (There is a simple water repellent effect) I will enter around 20 cards with regular business cards. [Kodawari point 1] Adhesion of the front and back boards inside to increase accuracy and strength We are stocking 18 bamboo shafts inside (not visible from the outside) [Kodawari point 2] We devised internal structure so that business cards will not get dirty, We devise it so that business cards touch only a minimum. 【Kodawari Point 3】 "Locking part" click! "It depends on feeling and ease of opening. [Kodawari point 4] Inside is a wood name stamp! ! [Kodawari point 5] If you wish, I will give you a name for laser engraving free of charge! If you would like please be sure to let us know in the remarks column etc! ! (We will ship when there is no contact in particular) Simple wrapping free! ! ※ Since photos are for shooting, the items we deliver will vary slightly in color and color. Please acknowledge it beforehand. ※ Parquet combination is also different from the picture. If there is stock, it can be shipped immediately, but if there is no stock it is made to order It takes 3 ~ 5 days by shipping. Production place / Production method Saga Japan / hand made