14 kgf - Floating in the ring pierced earrings (can change to clip - on)

***Please let me know if change to clip on!*** * Crawl ear ring large one point, returning post thickness 0.8 mm (coarse one point) Contract attention one down. ※ Customers who wish to wear earrings please be sure to tell in the remarks column. At first glance pierced rings are common, It is a piercing that looks like the lower ring is floating in the air. If you look closely, what's going on? ! It is a piercing of strange insistence design that seems to float. I did not have such a design! It shaped it. It is a twisted design, but in a basic form Easy to match gold, easy to use item that is easy to incorporate any coordination. The upper ring is fixed to the ear and the lower ring is It is also slightly different from the continuous ring Just like a pendulum shaking Edgey wireline is very bad It shines sparkly. Wireline has strength and stylishness We use square wire we brought. (The cross section is in the shape of a square) Most of our pierced earrings are about 0.7 mm thick It will be pierced post. This item is 0.8 mm and will be slightly thick, so those who are not stable pierced holes, Please note those who are not good at the hole. ※ Because we are using the tool, there are some scratches. Please acknowledge it. * Because it is making by hand one by one individually, it is not a complete object like made by machine, but we are trying to make the left and right as much as possible, but if you look at each pair a little difference We are located. Gifts at all 14 kgf, it is also recommended for gifts gifts! <Size> About 4.5 cm in total length Top ring diameter about 2 cm Lower ring diameter about 3 cm <Material used> All 14k gold filled <Used parts> All 14k gold filled The catch becomes a downward prevention catch and a resin catch. ***Please let me know if change to clip on!*** ~ For those of the earrings ~ ※ Customers who wish to change earrings should tell in the remarks column. 14kgf Clip part will be made with the wire line of the ring part. The rear side is equipped with a resin catch that is hard to hurt, and the sense of stability is also very good. Please slide from the root of the ear and bring it to the center of the earlobe. Please firmly pinch it with fingers afterwards. When lightly pulled down Since it may fall off if it seems to fall down, Even if pulling with a little force does not fall well just falls well. Although it is hard to hurt when you get caught somewhat strongly even if you get caught, If you feel pain, please use a little clip open. Please try and match the clip width that suits yourself several times! (Please be careful not to open the clip beyond necessity, due to metal fatigue There are things to be broken. ) * We have delivered a nano jewelry coating as long as you can keep a better condition. - About sending out For living in Vietnam, we will ship from Vietnam by international airmail. (2 weeks from shipping date) - Please read before purchasing · AN (Japanese) handmade one by one. · Because of handmade goods, please acknowledge somewhat different things in photos and real things. · The picture may look slightly different depending on the terminal you are viewing. - Since it is making delicate, please handle it carefully. · In natural stone, shades of color, inclusion and cracks may be seen, but please understand as an individuality, charm as a natural stone except for obvious defective products. <How to Care> After use, please wipe gently with a soft cloth etc. with no abrasive. After that we recommend that you put it in a bag with zip and store it. Produced by Japanese / Made in vietnam