Material: TPU (BubblePro) + Frosted Semi-Transparent PC
Edge Protection: Full wrap-around edges
Weight: Approximately 33g on average, slight variations depending on model size
Lanyard Hole: Yes
Features:
Anti-Slip | Diagonal texture on the sides enhances grip
Ultra-Antimicrobial | Certified antimicrobial, effectively combats 99.9% of bacteria
Anti-Fingerprint | Frosted, smudge-resistant backplate repels fingerprints
Full Protection | 1.5mm raised edge for superior screen protection
Impact Resistant | Patented BubblePro® shock-absorbing corners
Featherlight | 33g ultra-lightweight (slight variations depending on model size)
Strong Magnetic Adsorption | Enhanced magnetic force, 8N-9N adsorption strength, surpassing original manufacturer cases
Precautions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, we recommend cleaning with water or wiping with general wet wipes. Avoid using organic solvents such as alcohol or bleach.
⦿ Avoid exposing the phone case to extreme environmental conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., may also cause the phone case to become stained.
⦿ The sides of the phone case feature patented Bubble TPU, which significantly enhances shock absorption and anti-slip effects. This material is not stain-resistant. If it comes into contact with pigments or stains (e.g., lipstick, dye from jeans, dirt from inside a bag), it may be difficult to clean or impossible to remove completely. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to different device screens and resolutions. Please refer to the actual product for color accuracy.
⦿ The design and color scheme of this product have been approved by the original manufacturer and are protected by design copyright. We do not offer services for changing patterns or base case colors.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Other colors can be purchased separately.
⦿ This product can be transformed into a strap-attachable phone case by adding the optional screw-in lanyard ring set or hanging piece.
https://img.shoplineapp.com/media/image_clips/68c15b6c15ada400141429ff/original.jpg?1757502315=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- ซิลิคอน
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- ความนิยม
-
- ถูกชม 1,290 ครั้ง
- มี 0 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product is only available for shipping to: Worldwide
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้



