Salt & Light - Healing Salt Lamp | Ambient Lamp | Bedside Lamp | Night Light Recommendation | Smart Thermostatic Control

.Product Specifications - Reference Size: 14cm x 14cm x 20cm, Reference Weight: 4.5kg ± 0.5kg (1) This salt lamp uses the Smart Salt Therapy Starter (HE-26024). (2) Thermostatic control, power-saving and environmentally friendly, does not continuously heat. (3) Moving away from traditional tungsten bulb heat sources, an environmentally unfriendly structure, the new device's lifespan can be 30 times longer. (4) Thermostatic control allows the salt body's hygroscopic and negative ion generating evaporation process to cycle continuously, maintaining the optimal state for air purification. Overheating repels moisture absorption, while excessive cold reduces negative ion excitation. (5) No need to keep the lamp on 24 hours to prevent deliquescence. When going out or sleeping, it can be kept in a warm, unlit mode, continuously generating negative ions and preventing deliquescence. https://live.staticflickr.com/65535/53717544623_ac484d912c_c.jpg (Far-infrared spectrometer showing internal temperature under thermostatic control) (6) Smart ambient lighting design.. Breathing salt, golden warm tones, silver-white cool tones, easily matching seasons and decor backgrounds. https://live.staticflickr.com/65535/53733114701_31fcee29a4_k.jpg (7) World patent and international safety certification. https://live.staticflickr.com/65535/53717673674_7559e500d1_h.jpg https://live.staticflickr.com/65535/53717337396_1fd82d294a_k.jpg ____________________________________________________________________________ Operation Instructions Smart Salt Therapy Starter Installation: (1) The infrared remote control receiving wire must be placed outside the healing salt lamp to receive remote control signals. (2) When plugged in for the first time, it will display cold and warm light modes after power is supplied. I. Install the Smart Salt Therapy Starter through the base into the salt body. II. Install the Smart Salt Therapy Starter between the base and the salt body. III. Install the Smart Salt Therapy Starter in a container. https://live.staticflickr.com/65535/53717672264_132186b519_k.jpg ____________________________________________________________________________ Maintenance and Notes 1. Regularly dust the surface of the salt body with a dry cloth to maintain its good light transmission. This also helps the "Fei Yi Qing" healing salt lamp to continuously operate effectively with the moisture in the air. 2. If dirt such as smoke residue cannot be removed with a dry cloth, use a damp cotton cloth or sponge to remove dirt from the surface of the "Fei Yi Qing" healing salt lamp. Avoid immersing the healing salt lamp in water as much as possible. 3. The "Fei Yi Qing" healing salt lamp can be placed in rooms, bathrooms, damp basements, etc. However, ensure the Smart Salt Therapy Starter is operating normally to prevent the salt body from absorbing moisture and causing deliquescence. 4. To prevent condensation on the salt lamp surface due to humid weather or accidental splashing, it is recommended to keep the Smart Salt Therapy Starter turned on or in standby mode to avoid this phenomenon. 5. It is recommended to keep the Smart Salt Therapy Starter on normally for optimal performance. If the healing salt lamp is not used for a long time, wrap it in a plastic bag to protect it from moisture. 6. Avoid collisions or dropping to prevent breakage. <Notes> 1. Do not drop or apply heavy pressure to the remote control. 2. Do not mix [new and old] / [different brands] / [different types] of batteries, as this may affect the battery life and the function of the remote control, or cause damage. 3. If the remote control is not used for a long time, remove the batteries to prevent battery leakage from damaging the remote control. 4. This product uses standard AAA dry batteries (1.5V. AAA carbon-zinc batteries). Alkaline batteries are not recommended. <Service Description> 1. Damage caused by natural disasters or irresistible external forces. 2. Improper operation due to not following the user manual or operating instructions. 3. Disassembly or repair by unauthorized technical personnel of our company.