Dimensions
Vehicle (L × W × H): 10cm × 6.5cm × 6.5cm (including crew)
Standing crew figure height: ~5.5cm
Features
1.Includes an 8-wheeled Clouded Leopard armored vehicle model kit and three Q-version crew figures. A figure-free version is also available.
2.Crew hatches can open and close.
3.Rear hydraulic door in raised and open positions.
4.Partial interior details (driver’s and passenger seats).
5.Rotating and elevating turret.
6.Soft rubber-like tires.
7.Moveable wheels with steerable front two axle pairs.
8.Includes four sets of Taiwan military vehicle number decals.
9.3D CM-32/33 nameplate for enhanced display aesthetics.
10.Assembly and color painting instruction manual.
11.All-new Q(Cute)-version cartoonized design.
Important Notes
1.This 3D-printed resin kit requires assembly. An instruction manual is included for guidance.
2.Use nippers, hobby knives, or ultrasonic cutters to remove supports, then assemble with super glue, UV resin, or strong adhesives (plastic model glue is not compatible).
3.Resin parts are fragile; not recommended for young children due to sharp supports and breakability.
4.Avoid high temperatures (>60°C) or using it as a car decoration to prevent warping.
5.This kit includes 3D-printed parts (requires assembly) and water decals (must be cut and soaked before use). Paint, tools, and display base are not included.
6.Fine 3D printing layer lines may be present. Sanding with 400+ grit sandpaper, priming, and painting (acrylic, lacquer, or enamel) is recommended.
7.This is a static display model. Wheels can rotate but are not motorized (resin is not suitable for prolonged high-speed rotation).
8.Slight warping may occur due to shipping or environmental conditions. If needed, soak in hot water to reshape.
Vehicle (L × W × H): 10cm × 6.5cm × 6.5cm (including crew)
Standing crew figure height: ~5.5cm
Features
1.Includes an 8-wheeled Clouded Leopard armored vehicle model kit and three Q-version crew figures. A figure-free version is also available.
2.Crew hatches can open and close.
3.Rear hydraulic door in raised and open positions.
4.Partial interior details (driver’s and passenger seats).
5.Rotating and elevating turret.
6.Soft rubber-like tires.
7.Moveable wheels with steerable front two axle pairs.
8.Includes four sets of Taiwan military vehicle number decals.
9.3D CM-32/33 nameplate for enhanced display aesthetics.
10.Assembly and color painting instruction manual.
11.All-new Q(Cute)-version cartoonized design.
Important Notes
1.This 3D-printed resin kit requires assembly. An instruction manual is included for guidance.
2.Use nippers, hobby knives, or ultrasonic cutters to remove supports, then assemble with super glue, UV resin, or strong adhesives (plastic model glue is not compatible).
3.Resin parts are fragile; not recommended for young children due to sharp supports and breakability.
4.Avoid high temperatures (>60°C) or using it as a car decoration to prevent warping.
5.This kit includes 3D-printed parts (requires assembly) and water decals (must be cut and soaked before use). Paint, tools, and display base are not included.
6.Fine 3D printing layer lines may be present. Sanding with 400+ grit sandpaper, priming, and painting (acrylic, lacquer, or enamel) is recommended.
7.This is a static display model. Wheels can rotate but are not motorized (resin is not suitable for prolonged high-speed rotation).
8.Slight warping may occur due to shipping or environmental conditions. If needed, soak in hot water to reshape.