D&M Automatic Sensor Foam Soap Dispenser (Foam)

The simple and neat design elements add to the taste of home life, and the three-stage adjustable automatic foam design makes cleaning convenient and elegant. product specification ■Product Name: D&M Automatic Sensor Foam Soap Dispenser ■Product model: M809001501667 ■Product material: ABS plastic ■Dimensions: 70x98x219mm ■Weight: 267g ■Capacity: 300ml ■Material: ABS plastic ■Waterproof grade: IPX5 ■Working humidity: 0%-95%RH ■Working temperature: 5-40°C ■Rated voltage: DC3.7V ■Charging voltage: DC5V 0.8A ■Sensing distance: 0~6cm ■Single foam volume: high-grade 1.8g, mid-range 1g, low-grade 0.6g ■Use times: ≥50000 times __**How to use**__ 1. Use the Micro USB charging cable to charge until the white light flashes 2. Turn counterclockwise in the middle of the bottle 3. Add diluted soap solution (about 1:5) and turn it clockwise to tighten (correct installation is that the place where the foam comes out is on the same line as the transparent water gauge) 4. Touch the power button for 2 seconds to start up 5. After wetting your hands, reach out to the sensing area to pick up an appropriate amount of foam (if you remove your hands halfway, the soap will stop) 6. Liquids used: hand sanitizer, cleaning liquid, shower gel, shampoo (if it is too thick, it will affect the operation of the machine, it is recommended to use the content with higher fluidity) __**Power key switch**__ 1. Long press for two seconds: power on/off 2. Short press to adjust the gear position: white light: high-end, blue light: mid-range, green light: low-end __**Cleaning/Maintenance Method**__ 1. Please wipe the surface gently with a wet towel after turning off the machine 2. If it is not used for a long time, please remove the internal liquid first, and charge it once every two months. 3. Please place it in a dry place and a cool place, avoiding moisture, direct sunlight and heat sources 4. Cleaning mode: After adding warm water, click the power twice to start the cleaning mode 5. Please be sure to plug the waterproof plug tightly during the non-charging period of the product charging hole, and do not touch any liquid and cleaning agent. ____ https://live.staticflickr.com/65535/52901951619_5ca42995d2_o.jpg __**D&M Fragrance Moisturizing Hand Soap 300ml Extra Price Purchase Event**__ When you purchase D&M**Liquid Soap Dispenser Series**(any type), you can purchase**Fragrance Moisturizing Hand Soap 300ml**series at a discounted price [Original price] NT $180 [Additional price] NT $150 **Increase price purchase discount → https://www.pinkoi.com/product/2qAhBn9b** If the product is out of stock or other reasons of force majeure, Pinkoi DAVID & MAISIE Museum reserves the right to adjust the rights and interests without prior notice. ____ __**Notes**__ 1.**Do not immerse the machine in water or wash it directly with water**to avoid short circuit. 2.**Do not use liquids containing granules, powders, etc.**to avoid failure to give soap normally. 3. When charging is complete, please insert the waterproof plug into the charging hole to avoid moisture inside. 4. Please use the original factory cable for charging. 5. When there is still liquid in the machine, please do not put it upside down or tilt it. 6. During the use of the machine, be sure to cover the liquid cover well to avoid air from entering and causing the liquid to condense and make it difficult to flow. 7. Do not block the exit with your hands and objects. 8. When the sensing area is blocked by a foreign object, the red light will continue to flash for five seconds. Please turn off the power first, and then turn it on after confirming that the foreign object is removed and the outlet is clean. 9 When the battery is low, the red light will flash three times to remind you to charge. 10. If the machine has not been used for a long time (more than one month), you can turn on the power twice after adding warm water to start the cleaning mode, and then shut down and store after all the liquid is drained. 11. Under normal use, it will automatically enter standby mode without shutting down. 12. Children should be accompanied by adults to use it together to avoid liquid soap touching eyes and accidental ingestion. 13.**The seven-day appreciation period is a hesitation period and not a trial period. During the appreciation period, if you need to return the product, it must be complete, unused, and the packaging can be restored before you can return it. If there are traces of use or additional restoration is required, a refurbishment fee (30% of the price) will be charged.** __**Troubleshooting method**__ 1. Unable to turn on → please charge it to ensure the power operation. 2. The indicator light is off → please confirm whether the power on has been completed. 3. No liquid coming out → Please confirm whether the internal liquid is used up and needs to be refill. 4. The red light keeps flashing → please confirm whether there is any reflection on the countertop/ foreign objects on the sensor. __**Warranty content**__ ■ The product warranty period is one year from the pick-up date/arrival date. ■ Abnormal conditions that occur in the product itself under normal use. ■ When the product meets the return conditions for non-human use, please be sure to send back the product itself (including all original contents such as the product carton, charging cable, manual, etc.), if one of them cannot be returned Exchanges are not provided. ■ During the warranty period, if non-human damage meets the warranty definition, the shipping fee will be borne by the customer and the company each time; if it is identified as human-made damage caused by improper use, no replacement will be provided and the round-trip shipping fee must be paid by consumer burden. ■ The one-year warranty (from the date of arrival/pickup) does not cover the following areas: 1. The product should use the product suggested by the product description. If the machine is damaged due to adding non-recommended content, the product cannot be replaced. 2. If there is no proof of purchase, the order number or serial number of the product does not match the actual product, the warranty cannot be provided. 3. Normal wear and aging of appearance parts and consumables after use, such as peeling and fading of coatings on surface problems. 4. Improper use, such as shell damage, falling, damage, soaking in water. 5. Any damage caused by exposure to extreme temperatures, solvents, acids, water, fire, etc. 6. Natural disasters, such as typhoons, earthquakes, floods. 7. This warranty does not apply to second-hand resold products. ____ __**Warranty Login:**__ Item received**with warranty card**. If you have not received the warranty card, please__**contact the designer**__. ①Please scan the QR-CODE on the warranty card to enter ②**register/login**official website member ③Fill in**[Product Warranty Registration]**Required information on the page **Completion of the product warranty** ✱If you have any login problems, please__**Contact the designer**__or scan the warranty card QR-CODE at the bottom of the page**Telephone Inquiry** ____ __**Warranty Evaluation Process:**__ 1. Please contact us in the contact designer or order information window. 2. Please provide [order number], [problem product] and other information, and be sure to attach the problem information [photo/video] at the same time. 3. After the designer confirms the case, please send the product to the designated address. (Please note: the product must be fully packaged for delivery, including the product outer box, accessories, manuals, gifts, etc., and all contents must be returned at the same time) 4. After receiving the product, it will be evaluated whether it is eligible for warranty. After the evaluation is completed, we will take the initiative to inform you through the original contact information. 5. If the product meets the warranty replacement conditions, we will send the new product to your designated address;**If the product does not meet the warranty qualification, we will charge you the delivery fee and assist in sending it back to the designated address.** ____