Extremely slow cat

☆☆☆☆☆Car sticker construction🚧Focus on finishing⬇️⬇️ Tools: rag or rubbing alcohol, scraper or credit card, dry clean towel or rag 1. Clean the car body with a special towel, air dry or blow dry, and keep it dry. There should be no dirt, oil stains, or Wax. 2. After determining the position to be pasted, you can tear off the transparent film and the sticker together and stick it again (it will be easier to tear it slowly in the opposite direction), but you must be careful not to stick to each other. ✏︎The transfer film is a weak adhesive sticker, it cannot completely stick the sticker together, but it is attached for easy transfer, so it needs to be torn off slowly, ⚠️⚠️⚠️Tear it off slowly in the reverse direction, it will be easier to tear off! ✏︎There must be stickers attached to the release paper, which need to be retracted slightly and then glued slowly. The designer's works have always been detailed stickers, not the usual large stickers, so it must be difficult to get started. 4. After pasting, scrape and press several times repeatedly, and the direction is the same. Then peel off the transparent film.