Pre-order FUJIFILM instax mini EVO camera and see the printer now - Brown

https://www.youtube.com/watch?v=tGYNV7AGWOE&t=2s **product specifications** 1. Camera functions Sensor: 1/5-inch CMOS with primary color filter Record pixel count 2560 x 1920 Storage media built-in memory, microSD/microSDHC memory card Storage capacity Built-in memory can store approximately 45 images A microSD/microSDHC memory card can store approximately 850 images per GB The recording method is compatible with the DCF format of EXIF version 2.3 Focal length f=28mm (equivalent to 35mm equivalent focal length) Aperture F2.0 Autofocus single-shot autofocus (with autofocus illuminator) Shooting distance 10cm~infinity Shutter speed 1/4 second ~ 1/8000 second (automatic switching) Sensitivity ISO100~1600 (automatic switching) Exposure controlProgram AE Exposure compensation -2.0EV~+2.0EV (1/3 step) Metering mode: TTL256 split metering, multiple metering White balance auto, sunny day, cloudy day, fluorescent lamp 1, fluorescent lamp 2, fluorescent lamp 3, incandescent bulb Flash auto-flash/forced flash/disable flash flash Flash shooting range: About 50cm~1.5m Selfie approx. 2 seconds/approx. 10 seconds Shooting effects: 10 lens effects and 10 film effects The above effects can be combined into 100 effects 2. Print function Printing pixels: 1600×600 dots 800×600 points when printing from a smartphone Print resolution 25 dots/mm x 12.5 dots/mm (638x318dpi, 40×80μm dot pitch) 12.5 dots/mm when printing from a smartphone (318dpi, 80μm dot pitch) Print color gradation per color (RGB) 256 levels Printable image format JPEG Print time Time for image to receive photo output: Approximately 16 seconds * Add 7 seconds when printing in instax-Rich mode immediately after startup. Print function can print images from the built-in memory and memory card Reprint allows you to reprint images stored in the history (up to 50 images) 3. Others Smartphone application related functions: image printing, remote shooting, image transfer and printing, firmware upgrade LCD screen 3.0-inch TFT color LCD screen Number of pixels: approximately 460,000 dots External interface Micro USB Micro-B (charging only) Power supply with built-in lithium battery (cannot be removed) Built-in charging function The number of printable sheets is about 100 (fully charged) *The number of prints varies depending on usage conditions Charging time is about 120~180 minutes * (Varies depending on temperature and remaining battery power) Main unit dimensions: 87 mm x 122.9 mm x 36 mm (excluding protruding parts) The host weight is about 285 g Operating ambient temperature: +5ºC to +40ºC Humidity: 20% to 80% (no condensation) The photo paper used is instax mini (sold separately). Product specifications may change without notice as product improvements are made. Due to different monitors, the actual product may have a slight color shift compared to the screen. QR CODE is the registered trademark and word mark of DANSO WAVE Company. The word trademark and LOGO of Bluetooth® are registered and owned by Bluetooth SIG, Inc. Fujifilm Corporation can only use them within the scope of authorization. 【Notes】 ✱Instructions for returns within the appreciation period: Once unpacked and packaged in this store, except for new product defects, Returns and exchanges are not accepted (replacements for new products with defects must be determined by the original manufacturer) ✱The color of the product image will be slightly different due to differences in computer screen settings. The actual product color shall prevail. ✱This product is a pre-order product. If you need it urgently, please contact customer service for the waiting time.