Material: TPU (BubblePro®) + Frosted Semi-Transparent PC
Edge Protection: Full wrap-around edges
Weight: Approximately 33g on average, with slight variations depending on the model size.
Lanyard Hole: Yes
Product Features:
Anti-Slip | Diagonal texture on the sides enhances grip.
Antimicrobial | Certified antimicrobial, effectively combating 99.9% of bacteria.
Fingerprint Resistant | Frosted, smudge-proof back panel resists fingerprints.
Full Protection | 1.5mm raised bezel for screen protection.
Impact Resistant | Patented BubblePro® shock absorption with corner airbags.
Ultra-Lightweight | Feather-light at 33g (slight variations depending on model size).
Strong Magnetic Force | Enhanced magnetic strength (8N-9N), exceeding original manufacturer cases.
Precautions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, it is recommended to use clean water or general wet wipes. Avoid organic solvents such as alcohol or bleach.
⦿ Avoid exposing the phone case to extreme external conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., may also stain the phone case.
⦿ The sides of the phone case feature patented Bubble TPU, which significantly enhances shock absorption and anti-slip properties. This material is not stain-proof. If it comes into contact with pigments or stains (e.g., lipstick, denim dye, dirt from bags), it may be difficult to clean or impossible to remove completely. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to differences in device screens and resolutions. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product have been approved by the original manufacturer and are protected by copyright. We do not offer services to change patterns or case colors.
⦿ The product comes with an original case-colored Bubble lens frame and buttons. Additional colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding a screw-on ring set or hanging tab (sold separately).
https://img.shoplineapp.com/media/image_clips/68c1613a0f6df3000ed0fc06/original.jpg?1757503801=&owner_id=5f154b2d57a610002ff1679d
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.25,312 - อิเล็กทรอนิกส์ | No.10,068 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 1,453 ครั้ง
- มี 2 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้





