Material: TPU (BubblePro) + PC
Edge Protection: Full surrounding protection
Weight: Approximately 41g on average, slight variation depending on model size
Lanyard Hole: Yes (Ultra series does not have a lanyard hole due to pen slot)
Features:
Anti-slip | Diagonal texture on the side enhances grip
Extreme Antibacterial | Passed antibacterial testing, effectively fights 99.9% of bacteria
Anti-fingerprint | Matte, stain-resistant back panel resists fingerprints
Full Protection | 1.5mm screen protection for superior defense
Impact Resistance | Patented BubblePro® shock absorption with reinforced corner airbags
Ultra-lightweight | Feather-light 41g (slight variation depending on model size)
Strong Magnetic Adhesion | Enhanced MagSafe with 8N-9N suction power, exceeding original protective cases
Precautions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, it is recommended to use clean water or general wet wipes. Avoid organic solvents like alcohol or bleach.
⦿ Avoid exposing the phone case to extreme external conditions such as high temperatures or humidity.
⦿ Oily residues, hand sweat, and smoking can also stain the phone case.
⦿ The sides of the phone case use patented Bubble TPU, which significantly increases shock resistance and anti-slip effects. This material is not stain-proof. If it comes into contact with pigments or dirt (e.g., lipstick, dye from jeans, dirt from inside a bag), it may be difficult to clean or even impossible to remove completely. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Product colors may vary slightly due to different device screens and resolutions; please refer to the actual product for color accuracy.
⦿ The design and color coordination of this product are approved by the original manufacturer and protected by design copyright. We do not offer services for changing patterns or base case colors.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Other colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding the optional screw lanyard ring set or hanging tab.
https://img.shoplineapp.com/media/image_clips/698934d26319f149fb6e940c/original.jpg?1770599633=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.33,154 - อิเล็กทรอนิกส์ | No.14,351 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 90 ครั้ง
- มี 0 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product is only available for shipping within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้


