Material: TPU (BubblePro®) + PC
Edge Protection: Full wrap-around edges
Weight: Approximately 33g on average, with slight variations depending on the model size
Lanyard Hole: Yes
Features:
Anti-Slip | Diagonal texture on the sides enhances grip
Ultra-Antimicrobial | Certified to resist 99.9% of bacteria
Anti-Fingerprint | Matte, smudge-resistant back panel repels fingerprints
Full Protection | 1.5mm raised bezel for screen defense
Impact Resistant | Patented BubblePro® shock absorption with corner airbags
Feather-light | A mere 33g (weight may vary slightly by model)
Strong Magnetic Hold | Enhanced MagSafe compatibility with 8N-9N suction, exceeding original manufacturer's cases
Care Instructions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple dirt, we recommend cleaning with water or a standard wet wipe. Avoid using organic solvents like alcohol or bleach.
⦿ Do not expose the phone case to extreme environmental conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, and smoking can also stain the phone case.
⦿ The sides of the case are made with patented Bubble TPU, significantly increasing shock absorption and anti-slip properties. This material is not stain-proof. If exposed to pigments or stains (e.g., lipstick, denim dye, dirt from bags), cleaning may be difficult or impossible. For consumers concerned about visible staining, we recommend choosing darker colors.
Product Notes:
⦿ Colors may vary slightly due to differences in screen settings and resolution. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product are approved by the original manufacturer and are protected by copyright. We do not offer services to change patterns or case colors.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Other colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding the optional screw-in lanyard ring set or strap.
https://img.shoplineapp.com/media/image_clips/68c15b6ca7cc7300142042fc/original.jpg?1757502315=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- ซิลิคอน
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.1,782 - อิเล็กทรอนิกส์ | No.451 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 1,921 ครั้ง
- จำหน่ายไปแล้ว 5 ชิ้น
- มี 10 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้





