Elastic clip steel wire retractable buckle_with leather buckle_black/ Brown/red/dark blue/olive green

**[Friendly reminder]:**If you want to add steel stamp engraving service, it is an exclusive customized order and you need to pay first. In addition, since customized products can no longer be resold, you cannot apply for return and refund. Thank you for your support and understanding. <**Product Description**> **Material:**European vegetable tanned cowhide leather, Taiwan-made metal retractable buckle, Bronze snap buckle **Size:**Diameter about 3.5cm, thickness about 1cm, line length about 54cm; leather loop width about 1.2cm The width of the leather buckle is about 1.2cm, as shown below: https://live.staticflickr.com/65535/53707055323_03ab9b4906_b.jpg The leather buckle can be opened and put on the ID holder, as shown below: https://live.staticflickr.com/65535/53707177669_135cb36539_b.jpg The clamping force of the spring is very strong. It is recommended to slide and push from the tail end of the spring and fix it to the pocket or waistband, which will save effort, as shown below: https://live.staticflickr.com/65535/53705949462_b0466d7ddd_b.jpg https://youtube.com/shorts/X6sAc4nWOKY?feature=share **Engraving service:** 1. If you need engraving on the telescopic buckle, you are welcome to purchase it here: https://www.pinkoi.com/product/b8YCvXNB 2. If you want to purchase additional steel stamping, please provide the following font styles: https://live.staticflickr.com/65535/49925619286_f1b2d165aa_b.jpg 3. After deciding on the content and location of the engraving, just note it in the "Message to the Designer" section of the order. **The retractable button can hold up to 8 characters, with spaces taking up 1 character space and emoticons taking up about 1.5-2 character spaces. The completed engraving photos are as follows:** https://live.staticflickr.com/65535/52294071905_415425db7b_b.jpg https://live.staticflickr.com/65535/52293587163_abbb5c825b_b.jpg https://live.staticflickr.com/65535/52293612506_bac8575e62_b.jpg **Tips for use:** The wire of this telescopic buckle is made of six thin steel wires twisted into one and then covered with a film. It is easy to cut with special wire pliers. However, when the film is worn, the steel wire will become fragile if it is used continuously without protection. Therefore, if you can refer to the precautions and video instructions below and do daily inspections and treatments, he will live longer. **Maintenance method:** 1. When pulling out the steel wire, avoid it being scratched by other objects. 2. Avoid excessive bending or folding of the wire. 3. The hanging items are mainly general identification card holders. If they are too heavy, the internal spring pieces and wire segments will easily move, reducing the rebound force. 4. Please pay attention to the elastic force generated when stretching the line segment to avoid hurting yourself and others. 5. You can regularly wipe leather oil, Wax or vaseline on the line segment to reduce friction and loss during rotation of the line segment and extend its service life. 6. Avoid heavy objects or external forces pressing on the round body of the telescopic buckle, which may cause the line segment to get stuck. (The telescopic buckle is covered by two upper and lower shells. If it is accidentally squeezed by external force, it is very likely to cause the wire reel inside to get stuck, and the wire segment cannot be automatically retracted after being pulled out.) 7. How to prevent steel wire from breaking? https://youtube.com/shorts/P9mR8vdQMtM 8. How to repair when the wire gets stuck? https://www.youtube.com/shorts/ZomF-lgMysg **About natural leather: ** The marks left by mosquito bites during the growth of cattle, we will try to avoid obvious scars during production; in addition, each piece of leather will have growth grain, these marks of the life process are the unique part of each product. **BeingLife Design/Hand-sewn** **Designed and handmade in Taiwan**