Material: TPU (BubblePro®) + Frosted Semi-Transparent PC
Edge Protection: Full wrap-around coverage
Weight: Approximately 33g on average, with slight variations depending on the model size.
Lanyard Hole: Yes
Features:
Anti-Slip | Diagonal texture on the sides enhances grip.
Antimicrobial | Certified antimicrobial, effectively combating 99.9% of bacteria.
Fingerprint Resistant | Frosted, smudge-proof back panel resists fingerprints.
Full Protection | 1.5mm raised edge for superior screen protection.
Impact Resistant | Patented BubblePro® shock absorption with reinforced corners.
Ultra-Lightweight | Feather-light at 33g (slight variations depending on model size).
Strong Magnetic Adsorption | Enhanced magnetic strength (8N-9N), exceeding original manufacturer's protective cases.
Precautions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, we recommend cleaning with water or a general wet wipe. Avoid organic solvents such as alcohol or bleach.
⦿ Avoid exposing the phone case to extreme external conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., may also cause the phone case to become stained.
⦿ The sides of the phone case feature patented Bubble TPU, significantly enhancing shock absorption and anti-slip properties. This material is not stain-proof. If exposed to pigments or stains (e.g., lipstick, denim dye, dirt from inside a bag), it may be difficult to clean or impossible to remove completely. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to differences in device screens and resolutions. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product have been approved by the original manufacturer and are protected by design copyright. Image or case color changes are not permitted.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Additional colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding an optional screw ring set or hanging piece.
https://img.shoplineapp.com/media/image_clips/68c15b6c15ada400141429ff/original.jpg?1757502315=&owner_id=5670feec039055febe00003a
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.18,613 - อิเล็กทรอนิกส์ | No.6,344 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 1,207 ครั้ง
- จำหน่ายไปแล้ว 6 ชิ้น
- มี 14 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้




