Material: TPU (BubblePro®) + Frosted Semi-Transparent PC
Edge Protection: Full wrap-around coverage
Weight: Approximately 33g on average, with slight variations depending on the model size.
Lanyard Hole: Yes
Product Features:
Anti-Slip | Diagonal texture on the sides enhances grip.
Anti-Bacterial | Certified by antibacterial testing, effectively combating 99.9% of bacteria.
Anti-Fingerprint | Frosted, smudge-resistant backplate repels fingerprints.
Full Protection | 1.5mm raised bezel for superior screen defense.
Impact Resistant | Patented BubblePro® shock absorption with corner airbags.
Ultra-Lightweight | Feather-light at 33g (slight variations depending on model size).
Strong Magnetic Adsorption | Enhanced MagSafe compatibility with 8N-9N magnetic force, exceeding original manufacturer cases.
Care Instructions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, use clean water or general wet wipes. Avoid organic solvents like alcohol or bleach.
⦿ Do not expose the phone case to extreme environmental conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., may also cause the phone case to become stained.
⦿ The sides of the phone case feature patented Bubble TPU, significantly enhancing shock absorption and anti-slip properties. This material is not stain-proof. If exposed to pigments or stains (e.g., lipstick, denim dye, dirt from bags), cleaning may be difficult or impossible. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to differences in device screens and resolutions. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product are approved by the original manufacturer and are protected by copyright. We do not offer services for changing patterns or case colors.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Additional colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding an optional screw-on hanging ring set or hanging piece.
https://img.shoplineapp.com/media/image_clips/68c1613a0f6df3000ed0fc06/original.jpg?1757503801=&owner_id=5f154b2d57a610002ff1679d
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.4,384 - อิเล็กทรอนิกส์ | No.1,953 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 296 ครั้ง
- มี 0 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้



