Material: TPU (BubblePro®) + PC
Edge Protection: Full wrap-around edges
Weight: Approximately 33g on average, with slight variations depending on the model size.
Lanyard Hole: Yes
Features:
Anti-Slip | Diagonal texture on the sides enhances grip.
Antimicrobial | Certified to resist 99.9% of bacteria.
Anti-Fingerprint | Matte, smudge-resistant backplate repels fingerprints.
Full Protection | 1.5mm raised edge for screen protection.
Impact Resistant | Patented BubblePro® shock-absorbing technology in all four corners.
Ultra-Lightweight | Feather-light at 33g (slight variations depending on model size).
Strong Magnetic Adsorption | Enhanced magnetic strength (8N-9N), exceeding original manufacturer's cases.
Precautions:
⦿ Avoid direct sunlight exposure for the phone case.
⦿ For simple stains, it is recommended to clean with water or a regular wet wipe. Avoid using organic solvents such as alcohol or bleach.
⦿ Avoid exposing the phone case to extreme environmental conditions, such as high temperatures or humidity.
⦿ Oily hands, sweat, smoking, etc., may also stain the phone case.
⦿ The sides of the phone case are made with patented Bubble TPU, which significantly increases shock absorption and anti-slip effects. This material is not stain-resistant. If it comes into contact with pigments or stains (e.g., lipstick, denim dye, dirt from inside a bag), it may be difficult to clean or impossible to remove completely. Consumers concerned about noticeable staining are advised to choose darker colors.
Product Notes:
⦿ Colors may vary slightly due to different device screens and resolutions. Please refer to the actual product for color accuracy.
⦿ The design and color combinations of this product are approved by the original manufacturer and are protected by copyright. We do not offer services for changing patterns or base case colors.
⦿ The product comes with a Bubble lens frame and buttons in the original case color. Other colors can be purchased separately.
⦿ This product can be transformed into a lanyard-compatible phone case by adding a screw-on lanyard ring set or strap.
https://img.shoplineapp.com/media/image_clips/68c1613a21e48d00127db473/original.jpg?1757503801=&owner_id=5f154b2d57a610002ff1679d
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- ผลิตโดยโรงงาน
- แหล่งผลิตสินค้า
- ไต้หวัน
- จุดเด่นของสินค้า
- สินค้า IP ถูกลิขสิทธิ์
- จำนวนในสต๊อก
- มากกว่า 10 ชิ้น
- อันดับสินค้า
- No.21,561 - อิเล็กทรอนิกส์ | No.8,106 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 567 ครั้ง
- มี 3 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- ⚠️ Please Note ⚠️ This product can only be shipped within Taiwan.
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้



