[Handmade by Qu Shuichen] Obsidian Metal Thread Braided Bracelet

Obsidian bracelet, matching Stone are chromium diopside (green faceted beads), eagle eye Stone(gray beads), obsidian (black beads). The wire is made of pure copper wire with antique treatment, and the extension chain and buckle are made of Bronze. The size of the obsidian main decoration (width x height) is 42mmx22mm. If the width of the front of the wrist (upper plane) is significantly thinner than 42mm, the main decoration will exceed the width of the wrist. The evaluation can be based on the actual wrist size. The total length is 17.5cm + 3.5cm extension chain, suitable for hand circumference 15~17.5cm. The actual wearing video (the style above the video on this product page) is about 15.5cm hand circumference and the front wrist width is 43mm. [Instructions for modifying hand circumference] Lengthening: There is currently an extension chain. If it needs to be longer, the extension chain structure will be evenly distributed at both ends as a decorative chain for adjustment without affecting the main decorative structure. Shortening: If shortening is required, the existing decorative structure will need to be reduced, which will affect the balance of the current finished product, so shortening is not recommended for this section. If you need to modify your hand circumference, please indicate "fitting hand circumference" in the remarks. The modification will take three working days. Among the new bracelets this time, the presence of the main Stone is particularly emphasized. The most traditional obsidian was chosen, so I let go of the more complicated decorations. The overall width was controlled within the width of the plane above the wrist (although it was based on my hand😆), and the two ends were reserved for different chain body designs. Connecting the space, one end is a double-row chain, matched with dark green chrome diopside and silver-gray eagle eye Stone. At the other end is an obsidian bead that is as deep as the main Stone. ❖Photos of the works are mostly taken in natural light during the day, and the dimensions are length x width (x thickness). ❖Metalwork and silver jewelry works do not come with chains by default. In addition to commercially available Silver, it is also recommended to pair sterling silver vulcanized distressed works with Stainless Steel chains, which are more matching in color. ❖During the metal wire weaving and production process, the wire may be slightly pinched/cut due to the strength of the operating hand, which basically does not affect the wearing effect. ❖The label "Art Bronze" is a special wire for handicrafts with Bronze+ plating + protective layer. "Red Bronze" and "Bronze wire" are marked as bare Bronze(no electroplating). The Silver wire will be marked as 925 or 999 Silver. ❖Natural stones may be born with characteristics such as clouds, lines, ore defects. There may also be small flaws in drilling and polishing. ❖Shipment is preset for simple packaging, with clean anti-collision packaging materials and shipping bags, and sealed bags for easy storage. [Artistic Bronze braided jewelry] ❖ Artistic Bronze is a special craft wire made of pure copper wire + electroplating layer + protective layer. Under normal use and maintenance, the color can be maintained for several years without much change. ❖ Because there is electroplating and protective layer on the surface, please do not use Silver wiping cloth or toothpaste for cleaning, as this will cause the plating to wear out quickly. ❖ After wearing it, please wipe away any moisture (especially sweat) with a soft cloth and store it in the enclosed sealed bag. ❖ Please try to avoid wearing it in situations where you sweat a lot, such as sports, or in hot springs. In addition to accelerating the wear of the wire, it may also damage the natural stone. [Electroless Bronze/ Silver wire braided jewelry/metalworking sterling silver jewelry] ❖ Red Bronze and Bronze wire. Silver wires are all electroless-plated wires and naturally oxidize as a normal phenomenon (they will gradually turn into bronze/silver). The color and oxidation rate will be slightly different depending on the wear and personal physique, which is also one of the characteristics of bare Bronze jewelry. In terms of oxidation speed, red Bronze feels faster (it may turn into antique red Bronze in a few days to weeks), while Bronze and Silver are slower. ❖ The tone of the wire after vulcanization (distressing) treatment will be more stable than that of the untreated wire, but the polished parts will also gradually oxidize naturally. ❖ If you want to clean the oxidized part, you can generally use a Silver wiping cloth to wipe it, or use toothpaste to gently scrub it and then dry it or blow it dry with cold air from a hair dryer. ❖ After daily wear, you can use a soft cloth to dry the moisture and store it in the enclosed sealed bag. ❖ Please try to avoid wearing it in situations where you sweat a lot, such as sports, or in hot springs. In addition to accelerating the oxidation of the wire, it may also damage the natural stone. ❖ All works without electroplated wire can be sent back for re-polishing (you only need to pay the return shipping fee) 【Natural stone】 ❖ Natural ores may have clouds, lines, mineral defects, and black spots, and there may also be small flaws in drilling and polishing during processing. ❖ Most of the natural stones used in the works are semi- Gemstone. Some types of minerals may have low hardness (will be specially noted). Please try to avoid letting Silver wiping cloths, toothpaste and other abrasive and polishing items come into contact with the natural stones when maintaining the metal parts of the jewelry. part. ❖ Please try to avoid wearing it in situations where you sweat a lot, such as sports, or when soaking in hot springs. It may damage the natural stone.