https://live.staticflickr.com/65535/53188395985_965cb7ba58_b.jpg
Special attention. This 15 Pro/15 Promax series
Please note that the silent hole is an open hole design and is not covered.
The thickness of the shell itself will not affect the pressing of the action button.
Winter Collection
2022
/
milktea white dots hand stripe phonecase
https://live.staticflickr.com/65535/52562567007_c1c7b768fe_b.jpg
https://live.staticflickr.com/65535/52563158875_9321b774bb_b.jpg
https://live.staticflickr.com/65535/52408036622_0126f754e8_b.jpg
https://live.staticflickr.com/65535/52563350556_17efbf1387_b.jpg
------* Intimate reminder for the lens. notice.------
This lens has a covering design, so there is no need to use lens stickers.
--------------------------------------------------
The working days of mobile phone cases are 7-14 days, excluding holidays.
If the goods arrive early, they will be sent out early.
Working days start from 1 day after receiving the order
The quantity in stock is for reference only due to the large number of models.
(If you have any need for going abroad/urgent needs/gifts, please ask for the stock list first!)
Please note that the product design is not a high-function anti-fall or shock-resistant case.
It is designed with a hand strap and a TPU general protective soft shell!
If you need high-protection, high-fall-proof and high-performance products,
Please carefully check whether it suits your needs before placing an order!
* Please note when placing an order. It is recommended to use general commercially available full version or non-full version stickers for this protective sticker.
If it is an imos version protector, Rhino Shield protector, Zhuangzhuang protector, 5d or 6d above, the fuller version of the protector
Because the phone case itself has many edges, it is possible that the protective sticker may be touched! Please pay more attention!
https://live.staticflickr.com/65535/52562978459_f63dd9f056_b.jpg
https://c2.staticflickr.com/2/1971/43358116680_7d570b56ff_b.jpg
https://live.staticflickr.com/65535/52562692371_43950cc72f_b.jpg
https://c2.staticflickr.com/2/1808/28340135987_62876d0907_b.jpg
https://live.staticflickr.com/65535/52563158530_45b406b286_b.jpg
https://c1.staticflickr.com/5/4902/45440764385_eea7898633_b.jpg
https://live.staticflickr.com/65535/52562978444_53bdb48657_b.jpg
https://live.staticflickr.com/65535/50726214236_5718842103_b.jpg
https://live.staticflickr.com/65535/52562978429_4e0af2dd4c_b.jpg
Design Notes:
The material is milk gray matte TPU soft shell with pattern printed on the front side.
The version is fully covered. The version is covered from top to bottom, left and right.
The dots are white and the logo on the bracelet is hot stamped.
The hook and loop can be used to store the halter rope and the hand strap can make the grip feel better and safer.
The hand strap can be worn with fingers to hold Apple's original megsafe wireless charging OK!
Pull up the strap and place it on the table to watch videos or surf the Internet (the side of the strap is at the bottom)
The thickness is about 0.15cm, and the covering feels good and complements the mobile phone.
* Use of hanging neck: If you need to use a hanging rope to hang your neck, you can press and remove the upper ring.
Fasten it to the long round hole below and then fasten the lanyard.
The metal part is electroplated with matte texture and has a non-smooth glossy surface.
The matte surface has a texture compared to the smooth surface, so please be careful not to scratch it.
Please reduce exposure to water for electroplated materials to make the metal last longer.
The thickness of this model is 0.15cm, and it is about 0.05cm higher than the screen after the case is installed (bare metal)
If you have extremely high requirements for thickness and front height
Please consider and confirm before placing an order or contact us.
Generally, the mobile phone cases on the market are made in bare metal size.
So if too much is added to the phone itself, it will become thicker and cause changes in size.
It’s hard to choose a phone case you like!
*Please note that items purchased overseas cannot be returned or exchanged due to expensive postage.
* overseas's order have no return.
▲Mobile phone cases are products for personal use and can basically protect your mobile phone.
"There is no guarantee that your phone will not be damaged if you drop it." If so, please use it carefully in your daily life!
*Please note when placing an order!
The color difference of web pages is due to screen display and setting issues of everyone’s electronic devices.
Colors may vary, but we have tried our best to adjust.
If you are worried, you can ask us before placing an order. Please confirm before placing an order.
Returns or exchanges due to color differences will not be accepted.
Real shot of mobile phone installed model: iPhone13 promax gold
Origin/manufacturing method
made in Taiwan / Made in Taiwan
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- พลาสติก
- วิธีการผลิตสินค้า
- แฮนด์เมด
- แหล่งผลิตสินค้า
- ไต้หวัน
- จำนวนในสต๊อก
- เหลือเพียง 3 ชิ้น
- อันดับสินค้า
- No.10,477 - อิเล็กทรอนิกส์ | No.2,667 - เคส/ซองมือถือ
- ความนิยม
-
- ถูกชม 4,707 ครั้ง
- จำหน่ายไปแล้ว 37 ชิ้น
- มี 150 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
- รายละเอียดย่อยของสินค้า
- milktea white dots hand stripe phonecase
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้