✴︎---✴︎Commodity specifications✴︎---✴︎ Body size / 1x1x0.6cm Ear pin size / length 1cm Material / UV resin liquid Anti-sensitive package K ear ✴︎---✴︎金具用✴︎---✴︎ https://live.staticflickr.com/65535/48802753021_55cec8b2db_z.jpg ✴︎-―-✴︎耳夹✴︎✴︎---✴︎ https://live.staticflickr.com/65535/48802426038_e8fbbcbe1b_z.jpg ✴︎--- Please be sure to read the following instructions. The following conditions are not limited: ✴︎-―-✴︎ 1. Color difference: The product will have some color difference due to the computer monitor. The products are subject to the actual color. 2. Drilling and overflowing glue: The jewelry is handmade, and it is inevitable that there will be some slight offset, unevenness or residual glue. 3. Ear pin bending: hand made or sterling silver material is relatively soft, so a little bending is normal. 4. The difference in solder joints of micro-metals, fine scratches on the surface of the plating or small bumps are normal. 5. Retro gold jewelry is made of distressed special treatment after alloy plating, so there are more lines, this is a normal phenomenon. 6. The size, thickness, curvature, and line of the hand-made jewelry will have errors, even if the same pair of earrings can not be completely consistent. 7. Natural stone road: Each stone has different textures. 8. Bubbles in the UV resin solution cannot be regarded as ruthenium. 9. Small parts filled in the UV resin liquid will not be exactly the same even in the same pair of earrings. 10. Pure hand-made products will be different from the original picture, and there will be errors in size, thickness, degree of separation and lines. 11. Dimensional error: The size may vary slightly from measurement to measurement, and 0.1 to 0.5 cm is normal; Some micro-errors with a chain length of 0.5-2 cm are normal. 12. A few wire ends, grommets or pockets to protect the squeezing wrinkles that are not opened and transported.