This anchor ring was made with the lost wax casting technique.
Hand carved out of wax and then cast in sterling silver.
https://farm5.staticflickr.com/4371/37132722572_b342e4632b_c.jpg
https://farm5.staticflickr.com/4358/36907890180_9e5fd57e5e_m.jpg
https://farm5.staticflickr.com/4350/37132723302_8bc7a81045_m.jpg
Anchor Size : 12.5 x 13 mm.
This ring is 22 mm. wide at its widest point
Material : sterling silver with oxidized finish.
Ring size available only in 7.5
(inside diameter 17.7 mm. / inside circumference 55.6 mm.)
Designed and handcrafted by Napakas
HOW TO MEASURE YOUR RING SIZE
1. Prepare these common items; paper strip, a pen and a ruler
2. Cut a thin strip of paper.
3. Wrap the paper around your finger properly, not too tight and not too lose.
4. Mark the area where the paper meets and measure the distance with your ruler.
(using millimeters)
If you have any further questions, please don't hesitate to contact me.
*Please take a moment to check your ring size before ordering.
Manufacturing location(s)/process(es)
All of the products are handmade in Bangkok, Thailand
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- โลหะ
- อันดับสินค้า
- No.144,597 - เครื่องประดับ | No.7,745 - แหวนทั่วไป
- ความนิยม
-
- ถูกชม 7,617 ครั้ง
- จำหน่ายไปแล้ว 3 ชิ้น
- มี 8 คนถูกใจ
- สินค้าที่จำหน่าย
- สินค้าต้นฉบับ
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้