This is a high precision LED clock that shows time using colours. Just connect it to your computer! (USB cable included)
★The clock is hand soldered using SMD (Surface Mount Device) soldering. Normally, it is done made machines, so soldering SMD by hand is extremely challenging.
★ Showing time using colours
The clock shows time from left to right in the following order:
○○hours○○minutes○○seconds
Correspondence between the colours and the numbers:
0: Whitish blue 1: Red 2: Orange 3: Yellow 4:Green 5: Aquamarine 6: Skyblue 7: Blue 8: Violet 9: Pink
★Binary mode
Put the clock upside down to enjoy the binary mode and challenge your counting skills.
Violet is used to display hours, sky blue - minutes.
Every LED from left to right has a numeric value:
32 16 8 4 2 1
Add the values of the glowing lights to understand the time.
For example, on the photo with violet lights glowing:
16+4+1=21 hours
on the photo of the sky blue lights glowing:
16+2+1=19 minutes
So it was 21:19 when the photo was taken.
When the time is 00 for hours or minutes, lights do not glow. So at 00:00 no light will glow.
★Room temperature display (±3°C )
★USB and a tablet battery included
The clock works fine without any battery just if you simply connect it to your computer with a USB cable. But note that when disconnected all the settings will reset to default. Using a battery avoids such a reset. The clock will preserve the settings even if disconnected from power.
The clock does not run on battery!
★Other features:
DS3231 chip
cool mercury switch
cool brass spacers
cool steampunk look
touch buttons
the brightness has to levels and auto-adjusts according to the brightness in the room
chime
alarm
an ability to insert a message card under the top plastic screen
Please, check the full description on our website.
In the box:
clock x 1
USB cable x 1
battery CR1220 (is already inside the clock) x1
user manual x1
Colour of wood is chosen randomly.
Warnings:
✔The item is fully handmade. All electronic components are soldered to a circuit board by hand. Please, be sure to use with a lot of care.
✔ We design the final look, solder and finish the clock in Kyoto, Japan. We use Japanese cedar wood for wooden parts.
✔ Colour of the screws and spacers may slightly change depending on availability.
✔ All the settings set up is done by a mercury switch. It may be slow at times. Please, be patient and try again after some time.
รายละเอียดสินค้า
ข้อมูลสินค้า
- วัสดุสินค้า
- ไม้
- จุดเด่นของสินค้า
- บริการสั่งทำพิเศษเฉพาะลูกค้า
- ความนิยม
-
- ถูกชม 817 ครั้ง
- มี 3 คนถูกใจ
ค่าจัดส่งและรายละเอียดอื่นๆ
- ค่าจัดส่ง
- วิธีชำระเงิน
-
- บัตรเครดิต/เดบิด
- อินเตอร์เน็ตแบงก์กิ้ง/โมบายแบงค์กิ้ง
- เคาน์เตอร์เซอร์วิส
- ตู้เอทีเอ็ม
- เคาน์เตอร์ธนาคาร
- Alipay
- การคืนเงินและเปลี่ยนสินค้า
- อ่านรายละเอียดการคืนเงินและเปลี่ยนสินค้า
- แจ้งปัญหา
- รายงานสินค้าชิ้นนี้