【Siting】Yanhuang Land Art Fat Boss Longshan Tang Kuihuang Zhuni 140cc

Capacity: 140cc 【Kwai yellow vermilion】 Lock fragrance, sweet water The Zhaozhuang Nen mud deposit produces Stone yellow and Stone red, with a small amount of minerals. As everyone knows. but! You should also know that there is also a Manshengtu/Kuihuang Laozhu mud in the Zhaozhuang Nun mud layer. Kuihuang old vermilion mud contains more vermilion particles. The rose red sand of the original ore specimen under a magnifying glass is the vermilion particles. White to yellow to green are self-contained mud particles, which are irregularly distributed in the ore body in patches. The pot cotton made of Kwai Huang Laozhu mud has a higher density and a very good hand feel. The finished product is also stickier than other clay materials when it is made, because of the magnesium oxide element contained in the raw ore. Kiln firing temperature: No. 18 (1166 degrees), the color is most attractive. If the temperature is raised, it will appear orange and bluish in temperament. The raw ore contains red particles, which are characterized by trailing tails. Because the content of the red granules is vermilion mud, which is soft in nature. Therefore, the tail appears on the body or other unfixed positions. Warm the pot with boiling water before each use. Do not flush directly with boiling water. Because it contains a high amount of Zhaozhuang Zhu mud, it has a high degree of crystallinity. First: Pour in cold water at room temperature, fill it up, close the lid, and let the pot absorb the water. Second; Warm the pot with warm water at 40-50 degrees; Third, you can make tea normally. 【FAQ】 1. How to open the kettle before use Brush clean the inside and outside. It is recommended to use vegetable cloth. Do not use chemicals. Simply put, just scrub with water and it can be used normally. 2. How to soak During/after use, keep it clean/dry, otherwise it is easy to get stuck with tea stains. After use, place it in a ventilated place. If you want to store it in the box for a long time, it needs to be naturally dried for 1-2 months to allow the water in the air pores to fully evaporate, otherwise it will easily become moldy. 3. How to clean up stains or mold? Use enzyme soak. 4. Warm the pot correctly When the weather is cold, or it has not been used for a long time, please use warm water at 40 degrees Celsius to pour the inside and outside of the pot, and then fill it with water. Fill the pot body so that the pores of the purple sand can fully absorb water. 5. How to care for engraved works There are engraved works on the body of the pot. It is recommended to use a brush to clean it. 6. What should I do if it is damaged during delivery? Transportation safety is fully borne by Yanhuang Dadi Art. If there is any damage, please contact customer service immediately. 7. The products in our store are sold simultaneously with the physical channels. Handmade works are supplied in small quantities. Please check whether the ready-made products are in the store before purchasing.